nb : NOT a DIY more a "how I did it"
took me two hours
http://smg.photobucket.com/albums/v427/JoKerNZ/2012/Walbro%20install/
so at 40km shy of 230,000 pump dies on an intersection going to work
Step 1 : Identify fault = Pump no go, was getting power, no sound!
Step 2 : Email Brendon @ GFB (see sponsors section) recieve 500 HP pump overnight with fitting kit
Step 3 : Locate pump, under boot floor between rear struts, remove hatch and screws,carefully pull assembly out (after lableing lines