fbssub1

Using split rail fuel system and a link, not using factory rails

so do they need my intake and after market fuel reg?

Hi Im based north of Taupo have just brought some de-capped sidefeeds that are meant to be 820cc, just rebuilt motor 2.5 forged block, last thing I want to do is put these in to find it run lean and have a lot of money and hard work and months of work for nothing, want something as easy as putting into a post bag and sending, what is the cost per injector. Any help on this would be great. Cheers Brian

I have put V5 WRX heads on to a BGTT block, the ICV is different,V5 is a 6pin and the BG is 3 how can I wire in the V5 to the BG loom,. or can I run with out ICV hooked up?????

so do the 5 speed cable systems work in the 6 speed??

Have brought it, its in transit, not sure if plugs included,,soo ba roo spares said they would have plugs to suit, just the speedo side, dacerx you put a 6 speed in how you connect it all up as I have a 240kph I could use for back up being mechanicl speedo though might not be able to use it

have purchased a 300kph/10k rpm cluster from a B4 manual, what to put in my track car and use all of the cluster, fuel oil alt, other than a big auto sparkys bill can anyone help me out with the pinning of the cluster and what speedo parts I need to connect speedo to trans, 02 6 speed

I though as long as auto was in park when you removed it and the electrics off the trans where still on/in the car and hooked up to loom, everything should be sweet, speedo as long as you get same ratio g box should still connect via a standard electric sender it thought?? reverse would be trial and error with wires and plugs, hope it helps

Yep I did on my track car and got rid of the handbreak, you could install a hydraulic hand break and thus may be wofable but not sure, I transfered front discs to back and had to make spacers to get caliper centered to the disc, hope thts of some help, Im out Reps if you want to view just pm me

brought a car with roll cage, got log book, member of a club and have race License, car is not regoed do I have to re vin and get scrutinized to drive on the road, or does authority card bypass low volume cert

engine and trans code say rs-ra when looking them up but model says rs-r, car is badged rs-ra but is it