scottharvey

yeah Sf5 is turbo ej205 I\'ll give that a try when I get home tonight how do I bleed it properly

Around 7-8 ltrs to fill up it was overheating before water pump was done so I presumed it was that and changed the old was pretty corroded and had a bit of play on the wheel

They were both warmish not hot though

It doesn\'t bubble out of overflow I didn\'t bleed it properly but this is what happened 1st run after doing water pump took it for a drive it was fine then started climbing and top rad hose popped off didn\'t do it tight enough. 2nd run topped water back up then went for drive and got hot and heater was blowing cold air. So I then bypassed core. 3rd run took for a drive then same as 1st run but bottom hose 4th run was fine until climbing and then rad cap started leaking with the pressure And then I gave up too dark to carry on

Its just clear cause im putting water in it and no water in oil its very odd how do I do or get hg tested

Hey guys have an overheating issue on my sf5 forester I have done water pump have checked thermostat and bypassed heater core and it still overheats. Any ideas??