[Rebuild cost for EJ20G]

 hijacka said:

So thats $3180 without labour and machining cost Blair? Oh and minus the $200 for the cdb and $80 for the crank because he can use his standard one would take the cost under 3g..

+$400 for new oil cooler modine

[The "Boost Machine"]

Same way a GFB turbo fuse works i think

[Snail Billet Compressor Wheels]

That was quick 4 days from Taiwan

[Latest Purchase Gem]

One billet big16g

[boost problems 15psi/7psi]

replace the knock sensor ;D

[banjo bolts and banjos]

Have you tried GSS?

[Dyno Leaderboard Version III]

cheers, we were staying in Waitarere beach for a few days

[Post Your Impreza/WRX/STI Photos Here!]

very nice, but if you modify it i\'ll cut chew!!

[What have you done to your car today?]

Awesome, is it a pig to drive on the street? Or not to bad?

[What have you done to your car today?]

Im staying in waitarere beach till tomorrow, you can borrow my v7 sti valve or my adaptor plate on your tmic then you can use a stock one. (Got my spare bov with me)

or search nasioc on modding the bov with a grub screw to stop the pressure getting to the other side of the diafram

[clutch cover bolts]

theres one in able smith st next to ebbet holden

[What have you done to your car today?]

Did they stop you running after you got the 10?

[Snail Billet Compressor Wheels]

one of these would make it work easy enough

[What have you done to your car today?]

my v7 sti one is closed at idle, it does vent when im cruising at 100km/h.

swapped back to a GFB one on my new turbo, seems to work ok, Im sure its using less gas now as its not venting all the air at 100km/h cruise.

it could also just be in my head as I have adjusted my lean cruise on the link

[Snail Billet Compressor Wheels]

I thought td05h was a bit smaller? Heres the size of what im getting * In: 48.3 / Ex: 68 / Bore: 6.5 mm /10blades

edit...found wrx td05 sizes on a trademe listing In: 46.5mm / Ex: 60mm / Bore: 6.5mm

[Snail Billet Compressor Wheels]

Dont worry not spending crazy money on it but worth a try. Easy enough to find a tidy td05

[Snail Billet Compressor Wheels]

Just got a message from snail turbo, the wheel is on its way. turns out the big 16g is extended tip as well, the same design as garretts gtx wheels.

Ive had a bit of a search but cant find many results online.

Does anyone know if the compressor cover off an evo td05 big 16g will bolt onto a subaru td05? Need to round up some parts to make it work

[Snail Billet Compressor Wheels]

I entered a competition on facebook and won a billet wheel.

I\'ve asked for a big 16G 10 blade, will find a tdo5 and get it modified to fit, worth a crack they normally sell them for $250US

[gearbox stuck to engine block #$%#!!*]

ROST OFF FTW!! that shit rocks

[STM Half Price Tuning]

http://www.speedtechnz.com/SALE

5 spots only

[Lamco gague install]

search mofo search

http://www.clubsub.org.nz/forum/index.php/topic,6373.msg85125/topicseen.html#msg85125

I like this quote"Stoffa appears to have more knowledge on it than anywhere else out there on the www!!"

haha

[Lamco gague install]

temp sensor is usually in the sump plug on the lamco\'s, oil pressure goes under the altenator, and no its not at a special tension setting, dont over tighten it, but if its too loose it\'ll squeel.

[Latest Purchase Gem]

 evowrx said:

Why boost control? You not going g4?

+1 G4 boost control is fricken awesome!!

but I guess lack of inputs on a G3 for boost switch

[What have you done to your car today?]

If you looked like that joker id be on my way to dannevegas for a real hug

[Latest Purchase Gem]

 stira']

[quote name='Stoffa said:

Scored some cheap Speedline rims with some quality achilles tyres, they seem pretty light. 17x7 +48

img]http://img210.imageshack.us/img210/4444/img069ll.jpg[/img]

What do they look like on?

not sure they\'re in the boot of the car still, still trying to figure out how to explain to the mrs why I need them.

couldn\'t say no at $400