[Bw efr 6258g vs IHI vf 36]

Efr turbo is out,even though amazing turbos.Now looking at vf36,sti tmic and inlet manifold or vf36,legacy inlet manifold and fmic.

[Takata airbags recall]

37 minutes ago, Andy_Mac said:

 

 

Did you have pics of the dash before the swap? 

The Aussie pages have that happening every other day. With proof they all seem to be getting new dashes which is a decent deal considering most are starting to get sticky and cracking so not far from technically needing replacement anyway

Didn’t think I would need to taking my cars to a main Subaru dealership.But I did think that when I picked up the Legacy and thought maybe I had picked up a ding in my passenger door.

[Takata airbags recall]

Yeah,makes my blood boil when I look at my Outback dash and hear that dreaded dash rattle in my Legacy.Considered not getting it done when the paperwork arrived but after reading about wof being knocked back on non complying cars and the passenger side airbag only requiring replacement,why not.Problem was I thought the passenger airbag replacement was like the old Subaru’s,access to airbag by removing the glove box.If I had known that it was a dash out job I would have tried to find someone more competent to do the job.Personally I have removed three Subaru dash’s removing everything to the firewall and replacing with no damage or rattles.

 

 

 

 

32 minutes ago, SpeedySub said:

Anyone know what happens if you fail your warrant because of the airbag issue and it's an import?

I'm assuming you would have to cough up and get it done then try get Subaru to cover it.

I'm going to send another email to Subaru to find 1. Is my car in the recall or not 2. Will they pay if it fails?

I asked the same question at the dealership and was told they will do the NZ cars first and then move onto the jap imports.Subaru are apparently footing the bill.

[Takata airbags recall]

Had both of my NZ new but second hand 2007 Outback and Legacy airbags replaced.Both cars have clicked over 100,000k’s and are in very good condition.Drove Outback in with no airbag light,drove out with airbag light on.Returned vehicle and problem fixed,but damage to dash 25 mm dia vinyl missing,lever marks around center vents,scratched glove box and panels,glove box misaligned.Legacy faired better with dash center speaker clips damaged and a hell rattle.Workshop managers response,I didn’t do the job.Service mangers response,nothing.

[Bw efr 6258g vs IHI vf 36]

What turbo,injectors are you running and your opinion on the fmic lag vs factory tmic.

[Bw efr 6258g vs IHI vf 36]

All the information available for the baby efr turbo I’ve read is based on 2.5 L engines.Efr power rating is 260-440 hp.Apparenly spools up a lot faster then a Sti turbo and does not taper off boost at redline,2.0 L engine.Factory tmic stays as I’m not interested in big power figures,but will probably be replaced by a fmic later,or sooner if required.Vf turbo is a easier install if I can clock the turbo compressor housing,waiting to hear back from the workshop.

The vf 45 turbo design is a bit of a orphan and I want a larger exhaust housing.

[Bw efr 6258g vs IHI vf 36]

Anyone out there used a efr 6258 twin scroll on 2 litre engine or know of someone who has.Looking at replacing a vf 45 with either a efr 6258 or vf 36.I need to be able to clock compressor housing to 12 o clock position.Custom up pipe,turbo down pipe,tgv deletes and fuelling will be done at same time.I’ve had two tunes done on the vf 45 and custom 2 1/2” turbo back decat exhaust.First tune was a torque monster running 19.5 psi which I liked a lot but would not hold the tune.Second tune was less boost running 18 psi and moving the tune further up the rpm range.Car is a 2007 Legacy jdm manual and I would like to initially use the factory tmic.