-
Posts
2,517 -
Joined
Content Type
Profiles
Forums
Events
Store
Posts posted by Ninja8)
-
-
marc']
[quote name='Rosssub said:
More conversion parts arrived today. 8)
Thank you very much Marc. ;D Perfect.
/quote]
No Prob, Just clicked I didnt include the mani bolts as you might need the stupid long things lol. Let me know if u need them
Hmm yeah I will need them. do you have any GDB head breather hoses for TMIC I can buy, then throw the bolts in with them in with them?
I do but they are a big array of crap unlike the older ones. (they run thru the injector sheilding plates -which i have too but no1 bothers fitting them on modded stuff as they just get in the way)
Id just use push lock hose and a T fitting. (can be done neatly and come with most turbosmart Bolt on BOV kits as they dont clear the brather hardpipe) You running V7 type heads or v5/6 type heads?
Ur my backup memory Btw..you are tooooo smart 8)
-
marc']
Te37s been sold to a mate and on his leggy! Currently looking for some 17s before i get booked in for a cert! Marc only has 1 set of sexy 17s back so no go there!
[quote name='ADIKT said:
Looks good spencer
How much you pay for you bc golds?
/quote]
Got it off marcs race car for like $500 plus a couple clevis and a strut so owes me $800ish!
$ was 400 lol , stop killing brain cells lol :-X
Oh my apologies!
-
BC begins with B hehe..
Te37s been sold to a mate and on his leggy! Currently looking for some 17s before i get booked in for a cert! Marc only has 1 set of sexy 17s back so no go there!
[quote name='ADIKT said:
Looks good spencer
How much you pay for you bc golds?
/quote]
Got it off marcs race car for like $500 plus a couple clevis and a strut so owes me $800ish!
Im looking for some good but decently priced adjusties... not sure I wanna go brand new yet
Give a yell if you want me to price you up a set of BC..we get pretty good discount from redline through work...even better if we can get a group buy
-
Te37s been sold to a mate and on his leggy! Currently looking for some 17s before i get booked in for a cert! Marc only has 1 set of sexy 17s back so no go there!
Looks good spencer
How much you pay for you bc golds?
Got it off marcs race car for like $500 plus a couple clevis and a strut so owes me $800ish!
-
-
Will post some tonight...
[quote name='hijacka said:
Fitted bigger scoop today, Jase tuned car the other day big thanks! We got 15psi and then had problems with actuator blowing open, runs great though! and no more rough cold starts! Will take this engine to 20psi once i get actuator sorted and Jase is free. Should get even better iat with this scoop
Stay away from kinugawa internal adjustable billet actuators!
IMG]http://i1227.photobucket.com/albums/ee437/hijacka/20140429_131421_zpsa1f0d086.jpg[/img]
Thats interesting..so anymore then 15psi the kinugawa internal spring isnt copeing?? What if you adjust it? Im running the same actuator with my mse td06 and have not went past 12psi yet...
-
Installed BC golds and sorted ride height. Currently sitting at 300mm front and 280mm rear..
-
Part number sticker should be facing the front of the car
-
-
Thanks andrew!! Few minor things left to do which i will jam at work when boss buggers off. Soooo much easier with a hoist. Will try pick the boss Marc up on sunday and cruise to bastion for my first time in like 7 months!!
[quote name='Roo said:
Oh you got a front lip, looks good
Yeah doesnt look tooo bad! Up close theres is a small area of the lip that aint sitting straight on the bumper. Fresh white paint does look weird compared to the whole car but i reckon the colour matching was spot on!
-
-
Installed new wannabe defi boost gauge and went for a 2 hour ticky tour round since i am legally a undisqualified driver 8)
-
Wow! Must do some wicked burnouts!
-
-
+1 for price of rotors and who did u get them from??? They look the biz
-
I googled how to quieten down an exhaust system and found
Resonators
-
-
What do u not like about the tip andrew???
-
Happy late birthday!! ;D
-
Ordered replacement BC suspension bits..
-
-
-
ADIKT']
hahaha thought I mat get a comment like that.
I took my standard exhaust off just to see what it would sound like[quote name='ADIKT said:
Lol do you have no exhaust?
/quote]
No exhaust yet, coming straight off the turbo lol
Getting one done next week
Holy Sh*t... Don\'t melt anything. Must sound impressive though. ;D
So it was JUST a 3" downpipe.
Sounds bothering amazing.... but waaaaaaaay to loud!
Cant wait to get my exhaust done
If its too loud...your too old :D
Its like stupid loud though - If I were to drive it on the road , there would be no hiding from the cops!
EDIT: Link to video - doesn\'t really show how loud it is
https://www.facebook.com/photo.php?v=10152189824040932&saved
Not sure if link will work for non FB friends
Has to be the cheeky me to comment ay know exactly how loud it is lol. Definitely no hiding from anyone!
-
ADIKT']
I took my standard exhaust off just to see what it would sound like[quote name='ADIKT said:
Lol do you have no exhaust?
/quote]
No exhaust yet, coming straight off the turbo lol
Getting one done next week
Holy Sh*t... Don\'t melt anything. Must sound impressive though. ;D
So it was JUST a 3" downpipe.
Sounds bothering amazing.... but waaaaaaaay to loud!
Cant wait to get my exhaust done
If its too loud...your too old :D
-
Who's Online 1 Member, 0 Anonymous, 42 Guests (See full list)
Oil filter adaptor plate
in Engine Related
Posted
Yes there is enough thread for the sandwhich plate and as for size of the nut. Its 1"1/16 deep socket