Jump to content
Please check your junk folder for registration emails ×

banky

General Member
  • Posts

    269
  • Joined

  • Last visited

Posts posted by banky

  1. As above I am looking for someone to take a set of wheels from welly to taupo in the next couple of weeks.

    Wheels are located in Whitby but can be delivered around welly during the day if required from the good man Stoffa. And drop off is Taupo and the addy is nice and close to the new bypass so no mucking around at that end.

    Let me know if anyone can help out.

    Cheers

    Mark

  2. Pretty easy mate but can be a bit of a hassle the first time. Undo the 2 bolts holding the ecu to its bracket, slowly move all of the wires in its way and then start un plugging it all. Then once un plugged pull the sucker out. First time is always a bit hard but once the wires are pushed away it slips in and out easy as. And while you are down there spot the 2 white plugs as you will need these when you start chucking CELs.

  3. Just looking into getting some new wheels for the RA and was wondering what the widest anyone has gone without pumping the guards to much? (only after a slight roll as dont want to destroy my guards)

    I know that the sectors are 8inch with most offsets +50 but would be interested to know if anyone has stepped it up to the 8.5 or even a 9 with a slightly stretched tyre and a fairly high offset?

    Will also be running coilovers so will be fairly low but this is not a daily driver so I am not to fussed on the comfy side of things.

    Mark.

    Also forgot to mention wheel size is 17inch.

  • Who's Online   0 Members, 0 Anonymous, 79 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...