Jump to content
Please check your junk folder for registration emails ×

victorjf

General Member
  • Posts

    90
  • Joined

  • Last visited

Everything posted by victorjf

  1. Ive heard that apexi avc-r woks fine on legacy twin turbo, i found this one on trademe ( http://www.trademe.co.nz/motors/car-parts-accessories/performance/turbos/auction-395224145.htm ) old model. Does this old model work fine aswell ?? Thanks Victor
  2. Weird thing was that i hadnt VOD once, my car pressurized straight 14,5 psi from 3000 revs till 6000 revs,, no VOD, but was only 1 time. ??? ??? :-\
  3. Maybe it is a nobb question, but, today i put in my car manual boost controller, and max psi i had was 14.5psi, only in my first stage, my second stage still doind 12 psi. Why my second stage didnt change ?? And then i did other experience, i disconnected hose that comes from wastegate/turbo to regulator and i has 15 psi n my first stage, but my second stage still doing 12 psi. The question is: How do i increase my second stage. Below i made a video showing how i increased my first stage to 15 psi. Cheeers Victor
  4. its far away from me, but if i cannot find anyone else, i let u know. Do u have any idea how much would be ?? i heard from some people ( overseas ) this job can be done between 1, 2 hours , depends your knowlodge about what ecu you are wiring up . Many thanks Victor
  5. My friend got a legacy rs ( bought like legacy rs few weeks ago ) , that has on that 4G ecu and yellow injector, i told him that his cars is not a rs , its a rsb, as hes car is very tuned ( exterior ) i couldnt identify anything else. The questgion is: I was pretty sure that 4G ecu and yellow injector came out only gt-b and rs-b, now i got a doubt. Does anyone could confirm it ?? Hes car is a legacy 1996 TT
  6. Hey guys, i got in my hands perfect power smt8t , and i was trying to wire up by my self, but i couldnt. DOes anyone could helpe me it ? does anyone know someone to do this job on south island ?? bellow my ecu pinout 4G and SMT8T Pinout Cheers Victor thanks.
  7. i was thinking to put mirror tint on my car, but some peoples says that its illegal, however i found it http://www.aa.co.nz/motoring/aa-torque/motoring-blog/accessories-extras/vehicle-modification-rules-and-regulations/ and says that does matter what color is your film, but must to be at least 35 % VLT. Now i dont know....does anyone have more information about it ?? it says: The overall VLT of the glazing is important, not the colour
  8. does anyone have this diagram? what wire should be ?? Thanks Victor
  9. Hey guys, i just bought a shuft light and i trying to install, but so many wires at back of my dash. DOes anyone know what wire colour is a rpm signal ?? thanks victor
  10. Just got it. fitted few hours ago. 1 impression: Car has more torque, goes a litle bit more hard, i dont know about rev,s limit, i did 7.600 and still going. No speed limit, car kicks a bit more early, however boost still same . 12.3 psi primary and something around 11.5 secondary.
  11. Iam looking for some exhaust to put in my Legacy rs-b 1996, i found some on trade that came off from subaru GT BG . Does those ones fits on my Legacy ( BD ) ? or wagons has different ones ?? Thanks \Victor
  12. bought, let see what happens....
  13. Does anyone know anything about it ?? http://cgi.ebay.com/MINES-VX-ROM-4G-ECU-Subaru-BG5-BD5-EJ20-Legacy-GT-B-/390321424855?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D957018551306719787 thanks Victor
  14. after reads a lot about oils, i decided to use 0w-30 , but very hard to find it in blenheim, i found 0w40, but the cost so very high ( 100,00 ) 4 litre, and then i bought 5w30 =)
  15. Mate, i,ve seen some peoples doing it in south america and goes smooth. U can do it without problems, i think this block can handle more than 15 psi. As i told, i know some people that runs on 14.5 psi since 2007 on this block without problem till today. i just asked my friend how many km he had done runing like that and he told me over 40.000 now.
  16. Hey guys, i have to change my oil, and i would like to know what best one to put in my car. Its is a subaru RS-B , big end done 65 km ago, but midle wasnot done. I was think 5W-30 or 10W40. What best one ?? and how many litres goes inside include new filter oil ?? Thanks Victor
  17. In brazil almost all of them are converted to ethanol. most all turbo cars in Brazil runs on ethanol. U can buy ethanol on petrol station like u buy petrol. And i say...ethanol so much better.
  18. Hey guys, i just thinking to buy a avc-r to eliminate my VOD, but now gbf released this product, does anyone know if this product can make same thing as apexi evc-r does ?? follow link : http://www.gfb.com.au/index.php?option=com_content&view=article&id=104:stand-by-for-g-force&catid=15:product-spotlight&Itemid=175 cheers Victor
  19. my rsb is 206 KW, Manual. How do i reset my ecu ?? Thanks Victor
  20. I want buy ssqv for my legacy rs-b 1996 but i dont know exactly what size should be the adaptor. Does any one has ssqv on this kind of car ??
  21. I found out HID xenon conversion isn´t alowed, however i if u go on trademe, have lots of cars with HID conversion. Any one can help me ??
  • Who's Online   0 Members, 0 Anonymous, 146 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...