philr8
-
Posts
88 -
Joined
-
Days Won
1
Content Type
Profiles
Forums
Events
Store
Posts posted by philr8
-
-
We need to make a date and lock it in, then we will require at least 10 cars with payment to secure the day for us.
Ill make it happen at STM if no objections
Phil
-
Lets make this happen and set a firm date in place.
Date: ?? March 2015
Location: STM in no objections
Cost: $110 per car, includes AFR, boost and power/trq plots
10 cars to make it happen
Confirmed people
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
-
https://www.facebook.com/pages/Dynotech-Industries/509938849041709
Yeah, we're installing a boost gauge today to get an idea of the factory boost psi and working on the boost controller later on, will let him know about the reflash suggestion. Anyone know who would do a good one for a cheap price? -
When mapped correctly it can be used for throttle mapping and 3 different boost levels.
It works very well when mapped correctly!
Regards
Dynotech Industries
-
We personal have used the Launch Dia gun and Launch X431 GDS, i didnt like the product/software or back up service, so we went with the Hanatech ultrascan (but cost $12000 +GST)
Hanatech do a cheap unit to the everyday consumer and their service is provide through Petroject NZ who have been very helpfull with any questions we have had
Phil
Dynotech Industries
-
-
Posted here also so local Wellington members are aware
Regards
Phil
-
Due to an overwhelming number of PMs and emails from members in the same situation with Brendan pollock/flat four specialist, please feel free to call me as I don\'t have time to respond to all the emails
Regards
Phil Harris
Dynotech industries
021 606700
-
Today at 11:45am at the Hawera District Court, Brendan Pollock of Flat Four Specialist (F.F.Sltd) was found in breach of a contractual agreement (sale of goods) he entered into with myself.
Brendan Pollock of Flat Four Specialist (F.F.Sltd) was also found in breach of the consumers guarantee act buy not delivering the goods purchased within a reasonable time frame.
Brendan Pollock of Flat Four Specialist (F.F.Sltd) has been ordered to pay to me full cost
Please guys be careful when dealing with Brendan Pollock of Flat Four Specialist (F.F.Sltd), many of you emailed me saying you were in the same situation. I suggest you file Court proceedings against him to!
Regards
Phil Harris
-
Power fc is the way to go mate, I have tuned hundreds of them on the Pre 2001 WRX/STi. They are a great option and value for money for this model.
PM me if you want a price for a full Dyno tune on our Dynapack, we are in Hawera which is about a 2.5hr drive from you. I have a big client base from Wellington/Kapiti region if you want to ask them about me
Regards
Phil
Dynotech Industries
-
No your std MAF will do just fine 8)
-
As with all our Subaru mapping we run the car as it arrives to us. We then reset Ecu and get iam to 16 or 1 and carry out our base line reading.
No timing was pulled and iam was at 16
The Dynapack is super sensitive and can pick up a dip in power even if we switch the headlights on!
The boost peaked at 16.3psi via a MBC
You see everything with the dynapack, nothing is masked or hiding like it is with inaccurate road dyno software, variable roads, conditions, airflow etc
I posted only to show OP that good gains are to be had with a PFC
More than happy to discuss mapping techniques via pm with you or others
Regards
Dynotech industries
-
18 psi pretune on stock Ecu
-
-
Just fuel pump, catback exhaust and panel filter
Regards
Phil
Dynotech industries
-
Here is 1 we tuned a few months back with a PFC (V5 non sti)
We actually decreased the boost to 16 psi and made a huge improvement to power and torque!
-
Just to clear a few issues up
- Car does have IAT sensor, which is built into MAF the sensor
- Customer choose to run 23 psi boost
- That run was done in 4th gear, so ratio is correct at 5.501
- SAE is the preferred correction method by Dynapack where air temps are under 40C (during the run temp started at 22C and raised to 24C at end)
- Car was tuned and run up in 5th gear at 4.111 ratio (customer has printout etc for thoose runs)
- Just because a car made "X" amount of power with "X" amount of mods (or ecu) doesnt mean it will make more torque or power than car "Y"
- A Dyno is a tuning tool and the number that people should be looking at is the overall gain (ie before and after)
- Most dynos will read different (apart from Dynapack which has less variables) due to varying conditions, temp, strap down method, tyre pressure and type etc
Regards
Dynotech Industries
-
Totally different pipe
We have done 3 different options on several 2l JDM GRB STI cars
1. Cut off the turbo flange of the Xforce exhaust (or any GRF 2.5l Sti aftermarket down pipe) and weld on a laser cut JDM V11 flange (in stock)
2. Use the stock down pipe, remove the cat by cutting it out and replacing pipe (factory JDM downpipe is bellmouthed)
3. Replace the complete down pipe with a JDM aftermarket down pipe, $800-1200 NZD by time you get a decent one, GST, import duty etc
Regards
Phil
Dynotech Industries
-
The factory down pipe is bell mouthed on the EJ20 V11, why not just remove the cat?
-
95 octane and customer wanted low boost
Pink run was on 18 psi factory boost, as you can see it induces knock at around 5000rpm due to fuel quality
Solution
Turn boost down and remap
Gained 20kw and far better fuel economy!!
-
Hi there
We have tuned the exact same car with the exact same mods
Apexi paper filter
Xforce turbo back exhaust
95 octane
14 psi boost
They are shocking in std form and are prone to knocking and piston ringland failure!
Phil
Dynotech Industries
http://www.dynotechindustries.co.nz/news/2008-wrx-sti-25l-turbo/48366
-
Those prices seem fair for genuine gaskets, dont re use the old ones or silicone them up!!! Always use new gaskets, a few bucks spent here will save you big $$$$$ down the track. Also I would imagine the exhaust shop probably would refuse to do the job with out new gaskets.
Also $300 to do the job seems fair (4 hrs at $75 p/hr) is bang on the money and time frame. They have probably allowed this time frame incase they run into any unforeseen problems liked seized/broken studs etc
-
-
Up pipe
Down pipe 3" Wrapped
Full Exhaust
Panel filter
Walbro fuel pump
Ecu flashed with custom tune, AVCS tuned, AFR,boost and timing, knock control etc good for 220 - 235kw, Ive done plenty with great results and very reliable.
Phil
-
Who's Online 0 Members, 1 Anonymous, 131 Guests (See full list)
- There are no registered users currently online
WGTN - DYNO DAY
in Wellington / Kapiti
Posted
I'll be in Wellington every week from 1st March