[P2011 Tumble Generator Valve DTC]

Hey all

Anyone had this code before?

P201 Tumble Generator Valve signal 2 Circuit Malfunction (open)

Car is a 03 BP Turbo.

Apparently alot of the Imprezas have them as well.

Searching the net shows that most people buy a delete kit or remove the flappers them self and match port the manifold.

What have people on here done and how do I keep the code clear?

Cheers.

[Attn BL/BP turbo owners.]

Hey all...just a heads up.

My BP split the high pressure power steer hose as it was rubbing on the heat shield for the turbo. Right down low where it is very hard to see.

Might pay to check your car as its a mongrel to change!

[Courier run? Whangas to Auckland?]

I can do Tairua to Hamilton on sunday if thats any help?

[license loss lawyer]

A friend of mine lost his for too many demerits....he did it all him self and ended up with a work licence for $150.

[LEGACY 1999 B4 replacing exhaust]

Just disconnect it at the actuator. The 2 stage mufflers generally fall apart. Remember to tuck the cable out of the way as it will hang down otherwise...no issue to the electrics in your car.

[Which Ipod lead to use in a BP???]

Just installed the Grom Audio cable and blue tooth adaptor into my car....Fantastic result.

Works much better than I expected. Sound quality is great. Bluetooth works really well.

[Subtech Downpipe Review]

Yeah Mufflers and the centre section.

Let me know if you change your mind but really want something this week.

[Subtech Downpipe Review]

Have any of you guys that have changed your exhaust\'s still got the factory one?

I\'m after a standard exhaust for a turbo BP.

Cheers.

[Compression test on car with Link Computer]

Is there any thing special that I need to do before doing a compression test on a vehicle with a Link G4?

Is unplugging the coils enough?

I don\'t want to upset the computer.

1UZ-FE engine, Link G4 Storm.

Cheers.

[Which Ipod lead to use in a BP???]

Thanks...will order one today.

Another question.....do you have the blue tooth adaptor as well??? If so is it any good/worth buying?

Cheers.

[Which Ipod lead to use in a BP???]

Did you use both of them on the same car Invisible???

[Which Ipod lead to use in a BP???]

Hi

Looking through the options for running a Ipod through my Bp\'s headunit.

Would prefer to fit an aftermarket headunit but not willing to spend the $900 for the fascia with the AC controls.

Trademe has the following listings:

http://www.trademe.co.nz/Browse/Listing.aspx?id=556595063

http://www.trademe.co.nz/Browse/Listing.aspx?id=555303326

http://www.trademe.co.nz/Browse/Listing.aspx?id=556590396

http://www.trademe.co.nz/Browse/Listing.aspx?id=556607843

I realise the Ipod link go\'s into the 6 disc stacker plug so you cant use that any more (dont care about this).

Has any one got experience and which one would you recommend?

Thanks.

[Top Gear 2013 teaser]

3 days ago I drove the mountain pass from Hu\'e to Danang, Vietnam that they did on the Vietnam special.....Friken EPIC!!!

[mitsubishi help.......]

Fix the engine???

[legacy o2 sensor]

Yes it will work fine as long as you get the one with the correct amount of wires.

The new one will not have the same plug on it but it comes with a wiring harness with a new plug that you splice into you existing harness.

I got one of this guy for my old BH GTB....he was the cheapest I could find on trademe and also incredibly helpful....even sent me a xmas card this year.

http://www.trademe.co.nz/services/trades/automotive/auction-456406148.htm

[03 BP Clock fault]

Thanks...I found that Anything Electronic in Nelson do them as well. Not sure of there price though.

[03 BP Clock fault]

Hi.

Is there a known problem with the clock and trip computer on BP Legacy\'s? Non sat nav type.

Just bought one and it works intermittently.

Is it something simple like a dry solder joint or something more serious?

Cheers.

[NZ Post YouShop]

My 2 packages came super quick. Might be delays being so close to xmas. Shame I c**ked up the order and got the wrong size item!

[Crank pulley puller in Hamilton to borrow]

Hi

Got a suspected broken cambelt in my Hilux with 1UZ engine.

Does anyone have a puller for the crankshaft pulley they will loan me?

Tried 2 pry bars etc...

Former mechanic and I look after tools!

Txt 021791145 and I will call back.

[Lowering springs]

I had super lows in my old GC8 and every time I went over train tracks or hit a bump I thought the dash was going to land on my lap!

[Whiny Noise up front, guessing its a wheel bearing]

Could be a number of things. Stone in the brake etc?

Find a smooth piece of road.

Get up to speed (50kmph)

Put car in neutral and slowly move the wheel from left to right....you should "feel" the wheel bearing if its gone.

[NZ Post YouShop]

Came across this new product from NZ post today....

http://www.nzpost.co.nz/products-services/online-shopping/youshop

Buy what you like online in the States, send it to the US address.

NZ Post send it to you.

Pretty simple really

Check to see if you need to pay duty here:

http://www.whatsmyduty.org.nz/

Good for sites like dogfunk.com that wont send most things to NZ.

[Gull Petrols]

I use the Gull fuel in my 01 GTB Etune...runs well. Being do so for last 2 years!

[new clutch shudder??]

I pretty much got the fly wheel sorted straight away. The shudder could be felt through the whole car though...not something to muck around with as we all know about the Subaru bearing problems....Imagine that vibration going through the crank!

[new clutch shudder??]

Is it only shuddering through the clutch pedal???

I had my clutch replaced recently and BNT F**ked up the skimming of the Fly Wheel....

Had to come back out and be redone!