GorGasmSpecB
-
Posts
694 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Store
Posts posted by GorGasmSpecB
-
-
Had my ride height reset yesterday, front bushes replaced, aligned, new tyres.
New wheels are on order should be here in a month....
-
Cheers!
Goes in for Front sway bar and bushes and have the adjustables height set tomorrow.
Going to try saving for wheels instead of CCing, wheels should set it off.
-
I have only seen em for $500+
One on trademe went for about $220 but I forgot to check the auction >_<
-
Lol 50mm would be dragging its arse around. ~15 should see it level
Cheers
-
235 Is about as wide a tyre as you can fit without modifications. 235 may require guard rolling in some cases.
8.5" wide rim is about as wide as you can go as well with ~45 offset.
Standard offset is +55.
Im looking at getting some 18x8-8.5 +45 rims with 235/40/18 tyres.
-
Check out these forums for some info. Not many Gen 4's on Clubsub.
-
Yep all JDM spec B's should have 18" wheels with Bilstein suspension.
Actually I think ESC may have been an option for the 03-05 legacy.
-
Rear adjustables are setup for a wagon heh. Needs to come down 15mm
-
No ESC.
Probably 2-4 airbags. Driver/Passenger.
Differences are body kit and trim options in Jap models. I believe even GTs came with bilsteins in Japan. If you see a GT, check to see if the shocks are yellow.
No major issues that I know of. Trim wears a bit quickly on these models.
-
Get some bridgestone RE001's. $269 a pop at hyper for 225/40/18 and definately a quality tire. Not quite as good as RE050s but still good.
-
The anti lift kit then?
Unfortunately its out of stock but they can get more.
-
Yep, gen 4's don't rumble.
Not sure if these are the bushings you're after? Whiteline or nolathane may very well make a part for you.
http://www.whiteline.com.au/product_detail.php?part_number=W0506
-
-
TBH don't stress out about the regulars too much r0ksta.
They gave me all sorts of retarded shit when I boguht a nissan a while back, and ive seen them say a lot of stupid shit in the last 6 years.
In saying that, just go out and buy a car already, we can't tell you what you want.
-
Hyper tyres will sort you out. MY01's for under 200.
-
I can't comment on the service as I wasn't involved, but on a side note the exedy girls are hot
-
Seems there was two sides to this story, along the lines of you not wanting to pay for freight on the rotors from aussie so they put your order on a boat with their usual clutch order. Boat gets delayed, your rotors get delayed.
So if you want cheap freight, expect delays.
-
Haha my brother works for Eugene. Ill mention it to him tonight and see what he has to say.
-
herrp durrr durp durp durp.
-
Dont think anyone in NZ does em TBH. Hard to find stuff for the JDM Spec B. japanparts.com has them but you'll probably be looking at 800+
-
Looks kinda like a GT without the engine..
-
Bov's don't make the flutter sound at all.
You could be right though and the factory BOV isn't opening.
-
Whining isnt surging.
Put the normal filter back in if you don't like the fluttering noise.
-
Hyper are generally reasonably priced and do tein, H&R etc.
-
Who's Online 0 Members, 0 Anonymous, 257 Guests (See full list)
- There are no registered users currently online
Post Your Legacy Pics Here!
in Legacy & Outback
Posted
FFFFFFFFFFFFFFFFFFFFFFFFUUUUUUUUUUU...
$3000 euro's for the S202 CE-28's. Jesus f***.
The enkei STi wheels are a $1000 euro less, and are wider, and look just as good. Will take the enkei STi's thnx.
Can get Rota DPT clones from aus for ~1250 AUD.