Jump to content
Please check your junk folder for registration emails ×

Benj

General Member
  • Posts

    11
  • Joined

  • Last visited

    Never

Benj's Achievements

Learner License

Learner License (1/7)

0

Reputation

  1. Yeah so far so good, should have been the first thing i altered but my hoses were like shitty so I thought it was them. But allgoods, thanks for the help man.
  2. Haha, nah man i think i have fixed the problem! (its not leaking) i decided that maybe if i cant blow through it the pressure still might be able to blow it through (leak) and so I decided to strengthen it and it worked so far.
  3. Yup okay ill do that, do you think it could be the rubber bung i have put in the recirc valve? like letting air through because it heats up?
  4. Nope the BOV doesnt pull off and i can\'t breathe through it either.
  5. i went and bought like a water hose for an ae95 and fitted it around my bov piece and then i placed the original tube into the bov piece and into the water hose, then i clamped both ends so its tight and what not, but it still makes the revs go 0-1000 and stall.
  6. thats prob because theres a boost leak. the hose that goes to the bov, is it even sealed ? if not boon is right and it will get worse +1 Your BOV connection is leaking under vac causing your idle drop/stall. Also leaking enough under boost that there isn\'t enough pressure to pop your BOV off. Edit: Is the open manifold vac port (bottom of top pic) your BOV vac hose connection? Or is that still open? Whats a good way to seal it? it popped off. and its connected to the bov.
  7. thats where it runs from, and i\'ve been using it all night works algood. cheers for the help guys, i just bought a bung from mitre10. but my revs drop when i idle and stall the car sometimes, but eh.
  8. i was thinking that too, just incase it got sucked in
  9. would like a wine cork be all good?
  10. Good cause thats the one i didnt connect, what do i block it with? or can i just leave it open? currently this is what it looks like, as you can see the recirc tube is just hanging there
  11. Yeah im new to this site, i recently purchased a shitty bov from repco, just to hear that whistle as the stock bypass valve aint doing the job to good. I just need a few steps as in like how to block the recirc tube and s*** i had previously read this http://www.clubsub.org.nz/forum/index.php?topic=37927.0 Im not to fussed about problems with bovs i just want one. Also which tube is the recirc tube? the one with the arrow pointing at it? cheers.
  • Who's Online   0 Members, 0 Anonymous, 100 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...