[Problem with Subaru B4 Legacy]

Sounds like you could have a loose wire or plug in the back of your gauge cluster you will need to pull it out to check them

[CEL code 65 and 66]

Just hook in the 23 line where the joiner is or does it replace the solenoid in the inner guard ???

[CEL code 65 and 66]

Hi guys I've manage to fix my issues by replacing the black box and then since then I've almost replaced all the cacuum lines with solicon hose but how do you hook up a boost tap a drawing would be good thanks

[Stickys]

If I go into legacy help section and click on any of the links it take me back to main page unless it won't work on my I phone ??

[Stickys]

What's up with the Stickys can't get into them

[CEL code 65 and 66]

Bugger but thanks at least I know that things are working properly now pheew

[CEL code 65 and 66]

Hi Ross I've replaced the front pipes checked the turbo again it seems to have pull on secondary but still not really showing any boost increase so not really sure what else it could be what about cleaning solenoids etc could this be the go ????

[Gauge cluster]

Thanks guys for help and advice and Andy Mac I do have one from a car I've been wrecking that's what gave me the idea

[Gauge cluster]

So apart from the gear selector in the middle would it work in mine ?

[Gauge cluster]

Has any one swapped the dashes ????

[Strange noise]

Noise sorted while replacing my left rear light found that my car does have exhaust valve motor still connected even though I have aftermarket tail pipe removed and no more noises yay

[Gauge cluster]

Hi guys will the gauge cluster from a BE auto work in a manual I only ask as I like the fact you can't see the gauges till the ignition is on but on the manual you can see it all the time ??

[BE front mount options]

Thanks guys for the help

[BE front mount options]

Hi guys are there any benefits from going front mount if so what do you do with the vacuum hoses going to intercooler now ???

[CEL code 65 and 66]

Hi thanks Ross I've got another set of front pipes and intermediate pipe of another car in going to fit and try

[Strange noise]

It's hard to explain its sounds like a little motor going back and forth once then stops

[CEL code 65 and 66]

Bugger what else can I try ??

[Strange noise]

Ahhhh Ross you got it best I don't disconnect it then if I want my pump going lol

[Strange noise]

I heard the wagons do but not sure about sedan if it is that can I just unplug it as I have aftermarket rear muffler on it

[Strange noise]

Hi all I've got a 2000 be5 b4 manual sedan when I turn the key on there's a strange sort of motor noise that comes from the left rear of the car and it's not the fuel pump any ideas what it is plz I did find a module with a heat sink in left rear panel of the boot not sure what it is and can't find a way to upload a pic any ideas

[CEL code 65 and 66]

Is there any down sides if I remove both cats

[CEL code 65 and 66]

Hi Ross the air filter is a new one and I've done the hose 10 mod and the .8 pill in hose 1 but could that be giving me trouble

[CEL code 65 and 66]

Hi Ross gave the car a reving on the way home it does drop of boost around the 4500 then pick up but only to 10psi ??

[CEL code 65 and 66]

That I haven't noticed ?

[CEL code 65 and 66]

Hi Ross I'm plumbed into hose 11 for boost gauge and I've done test mode and all seems to be working ok ???