-
Posts
773 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Store
Posts posted by iludez
-
-
I'm in Blenheim man. There's no one here who does guard rolling eitherI doubt that will be a problem but I may be wrong. If you are in my area I have a guard roller you could definitely borrow
Sent from my MX4 Pro using Tapatalk
-
I'll be running 215/45s.Mine are 8.5 inch wide with an offset of 42 and I had to roll the guards. Pretty sure 7inch with offset of 38 shouldn’t be a problem. Depends what tyres are on them as well. I’ve now got 235 tyres and it doesn’t rub at all with rolled guards but I’m not that low.
I'll test fit them today and see if they stick out
Sent from my MX4 Pro using Tapatalk
-
So will be a 50mm poke compared to 33.9mm.[mention=17874]McMasterJamie[/mention] has a reasonably aggressive setup from memory. May be wider with less offset but can compare poke in willtheyfit.com
I assume this will be a no go then with me being on coilovers too
Sent from my MX4 Pro using Tapatalk
-
Could be right on that actually. Just 7" wideFairly sure stock are 17x7 +55
How wide are they?
Sent from my MX4 Pro using Tapatalk
-
So I picked up another set of wheels, didn't even occur to me to check offset. As the guy said they are off a subie.
Turns out they are +38 and I'm sure my stock wheels are +48
I would assume these would stick past the guard?
Anyone ran lower offset like this?
Sent from my MX4 Pro using Tapatalk
-
Couldn't agree more, it's a brilliant drive.
If it's hot enough stop at sailors grave for a dip. Or even hahei
Sent from my MX4 Pro using Tapatalk -
The new wheels. And some interior shots
Sent from my MX4 Pro using Tapatalk- 3
-
Thats awesome. When i had my old gt it had a pretty loud bov on it, my 2 year old was asked what noise does dads car mske and he goes. Bwaarrrp pshhhh
Sent from my MX4 Pro using Tapatalk -
So new wheels happened on Friday. I really like the look of these ones. Will post pics when ive cleaned them up. I need centre caps too.
New double din headunit installed and made a new shift boot. Installed blitz boost gauge also.
Had to call it quits as i have a kidney stone so pain kicked in.
Sent from my MX4 Pro using Tapatalk- 1
-
What i do with mine is put toothpaste on them, get a scotch pad and scrub it. Let it sit, then hose off. Scrub with water and toothpaste again.
Then use waterless wash & wax. Comes up really good.
Sent from my MX4 Pro using Tapatalk- 1
-
Dont see a 12 month option there? And nothing in the store either
Sent from my MX4 Pro using Tapatalk -
Where can i get a CS sticker?
Sent from my MX4 Pro using Tapatalk- 1
-
My old home town!
Sent from my MX4 Pro using Tapatalk -
Hurry up and do your wheels whiteOhh that looks mint! The wheels IRL would be a lot more clean looking and less bright I think so it would be sweet haha.
Do you think white wheels and tyre lettering or just lettering?
$200 is expensive but it makes it look so good I think.
Sent from my MX4 Pro using Tapatalk
- 2
-
God i need s foam gun and water blaster
Sent from my MX4 Pro using Tapatalk- 1
-
Ill possibly buy your old onePicked up a bh5 genome exhaust and replaced the be5 genome I have on the car (the bh needs a longer tip) i now have an 'outboard' exhaust instead of an 'inboard'. Now to pressure [mention=19914]HKM400[/mention] to get another Subaru so he can buy my old exhaust
Sent from my MX4 Pro using Tapatalk
-
Funny watching this thread but nit being able to participate. Since im an ex jaffa
Sent from my MX4 Pro using Tapatalk -
Yesterday put a rsr exhaust on the wagon. Very nice sound. But i need a silencer i think.
Also got a double din android head unit went to install it and it doesn't fit????? Too wide or something
Sent from my MX4 Pro using Tapatalk -
How do they run generally? No cel etc?It's an HKS replica plumbed back in. I think if I had run it to atmo I would have found the problem earlier as it would run like balls.
I tightened it up yesterday/today and replaced the vac lines and it seems to be happy enough now. Runs much stronger.
Sent from my MX4 Pro using Tapatalk
-
I was wanting to do this on my wagon too. But with the lettering pen instead
Sent from my MX4 Pro using Tapatalk -
Exhaust waiting for me at the depot. Much excitement!
Sent from my MX4 Pro using Tapatalk- 2
-
What bov you run on yours?Was about to say I have a similar issue with my BOV at the moment, just sounds like a duck caller over 17psi. Took out the BOV and no more ducks, just tssssssssuututututuuuu
Sent from my MX4 Pro using Tapatalk
-
Any video or soundclip of the noise?
Sent from my MX4 Pro using Tapatalk -
Nice, what parts?Drove to auckland to go to rainbows end, found it boring so i went to zebra and picked up some facelift goodies for the wagon
Sent from my MX4 Pro using Tapatalk
-
Who's Online 0 Members, 0 Anonymous, 171 Guests (See full list)
- There are no registered users currently online
+38 offset on bh5?
in Legacy & Outback
Posted
Sent from my MX4 Pro using Tapatalk