toad

engine lights works as per normal thankfully lol

the manifold i put on was the off the same engine but not the one that came off. i had to put a bolt in a threaded hole on right side on maifold at the back as had a flame come shooting out of there when started for 1st time, looked on orignal manifold and there was a bolt in there.

*cuddas* its that the thing that sits in the left hand side (not turbo side) of manifold? circle thing with lines on it? that has been out. its back in. the lines are facing out and it has a rubber o ring thing that sits in there aswell. *BF5GT90* whats CELS?

im 99% sure i have a hoses and wires and fuel lines hooked up the right way. when i pulled back apart i rechecked everything and replaced hoses that i thought could be the problem. i had the injectors out of the rails and fuel rails out and disconnected from the fuel rail under manifold. ive looked at pictures on the net (couldnt find any clear enuf that had a close up pic) but yea im soo sure ive done everything. the ground on the manifold there is only 1 connector that goes there?

hey ppl. i have a 91 facelift bc5 rs. last weekend i decided to take manifold off etc to give a paint and clean everything up. upon installing again the engine wants to stall now and while reving it (still in the garage) the engine pops. ive tried changed coil plugs round, injector plugs round, pulled it apart agin and retraced my steps but still no difference. i was wondering if any1 had any ideas or any in invercargill could pm me and pop round to have a look plz. thanks ???

jack it up at myne dude.

hey ppl. i got no power going to my abs ecu. i put a power probe in the number 1 pin on the abs ecu (battery) and it poped fuse in probe. so i now have to back track and find whats goin on. ive got power in the fuses under bonnet and abs solenoid fuse under dash. ive followed the blue power wire from abs ecu and it runs over the passenger side then up into dash. do i have to take dash out or is there a easier way? bc5 rs ???

oops shameful. i 4got the hose on the wastegate lol :-[

its all just standard

hey ppl. my 91 rs is boost spiken. how do i fix it from doin this. it just runs standard wrx engine. i think its a boost spike. the boost gauge dials spins right up to 30 psi then the engine cuts out and starts boostin again? its a autogauge boost gauge ??? ???

black backed

nah havnt got them yet. had the idea today at work as we had a wrx in that had them so it got me thinkin

thanks dude. LEDs are awesome lol.

yup yup. want sumfin dif lol. like angel eyes like my rs so join them

yea was guna by wrx ones. how would ya make them fit tho?

hey. i was wondering if its possible and how hard would it be to fit and install angel eye headlights into a 91 rs?

yea dude im keen to meet up, cruise, bbq or sumfin to get no more people.

no expense is guna b spared with it. want it to last lol

oh yup wicked. the ej20tt is out of a b4. just rebuilding the version 2 sound gud to me ;D

the ej20tt is a 1998 also

im guessin so. it was in the car when i brought it. im not in a rush to rebuild as its guna b a project

yea the version 2 i brought. i have a 91 rs with wrx engine

its a version2 ej20t

hey everyone. i brought a red top ej20t with bottom end bearing done. only cost me $100. came with turbo everything etc. im rebuilding it myself with race bearings, forgeys etc. i have a twin turbo engine sittin around and is there anything i would need off that before it goes to scrap? ive herd the heads are stronger? any help would be great thanks

lol thanks guys. i rethreaded them 2day. so fingers crossed for the weekend