hijacka
-
Posts
2,100 -
Joined
Content Type
Profiles
Forums
Events
Store
Posts posted by hijacka
-
-
Um so u need to figure out if its bent or folded over..looks folded from pics if its folded then it's restricting air flow and could also be leaking. Cable tie is not best thing either better to use clamp. map sensor should always be directly connected to manifold it's manifold absolute pressure After all.. never tee anything in to it.
-
-
-
Running a vf22 at 20 psi is just asking for trouble I wouldn't Wana take it any more passed 18 the compressor blades are weak. Also running a external wastegate with anything vf is total wanker factor it's most likely your issue ie to much exhaust gasses air bypassing the turbo.. the gate is probably opening and shutting opening and shutting tryin to hit the rediculous target boost pressure which would explain the surging or pulsing...
-
You need to put the belt back on first if you have removed it
-
With leverage on the Allen key bolt hit the bar/Allen key with hammer.. try hitting the bolt head with hammer to break the locktite but not yo hard as you can damage the head
-
Ryco are chinese made if you want to distinguish between brands. They are very like castrol. Very smart marketing in a world where perception is reality. Means you can charge more than anyone else and say its because your product is so much better.
It really doesnt matter whether they use steel end caps or ones made of sheep **** if it meets or exceeds the manufacturers spec its not any worse is it...
People get so hung up on genuine and fail to understand genuine parts arent always made by fhi. Chances are Sakura lads make their filters in jakarta along with a **** ton of other gen manufacturers.
Re read my post if that directed at mine! I never said ryco wasn't China made I said Repco use to use ryco filter but switched to a ''CHEAPER Chinese brand'' please correct me if I'm wrong lol
-
I run ryco i like the fact it's rubber seal is pre oiled straight out the box and not dry
. I think most go wrong with oil changes when they don't prime the engine afterwards. You Should never start the engine after simply disconnect the injectors and crank it over until the oil light goes away. I must say i have notice through the years of working on subarus that most that run beb have either a frame or Repco branded oil filter.. not saying that it's the cause but it's enough for me to pick ryco over those 2 anyway. Repco use to use ryco years ago but switched to cheaper China brand and label them as there own
-
Might have a v4 blower fan unit aswell.. like 20slides for it will do. I'm sure I do have one but might pay to pm me the part number so I can double check.. if it's toasted then it will die on idle and won't run on once you disconnect the bat terminal can't see how it would effect the ecu either
-
Flick me a pm if it does I should have a good alt there
-
Hi mate when you start it does it still run when you remove the positive battery post?
-
Its not power that kills them. Ive had 3 boxes give issues at low 200wkw and none went under pressure. Always launch with wheel spin dont bog and she'll be right.
Classic! should be Quote of the year;)
Fwiw you can use the early Centre diff housing etc from a box that has cut outs for reverse gear lock out thingy think it's 96 onwards the earlier 5 spds don't have the cut out in the inside of the housing for it so you will never get the housing on
-
What rev is it? Here's a d https://touch.trademe.co.nz/motors/listing/view/1063852531
-
Just repairing the head gasket alone is asking for trouble especially with those kms it's most likely going to run a beb soon anyway. If I was you I would slap a running long block in there or sell it and buy another car
-
Thanks matey! There is a reward if it's found but I would say it's most likely stripped out by now. Was stolen from town during work hours.
-
FFS lol here... fronts just scroll down and add to cart..
https://partsouq.com/en/search/search?q=26297FE010&gclid=CPvt6LLXg8wCFYEIvAodJOwMKA
Rear part number is 26697FE000
-
-
Ok well there ya go
do you know the volume difference between the 2? Im in the market for some v8sti heads if anyone can help -
No worries seeing your heads are v5/6 then perhaps might be easier to go the special pistons designed for it that give abit more volume.. they aren't designed for the v3/4 clover shape chambers and I was going for destroker pistons with offset gungeon pin so that wasn't a option at the time. I don't think anyone in new zealand has a program to cnc to ej25 spec which off the top of my head is around 52 cc but don't quote me on. Let us know what Peter can offer. . He does all of Frasers work to
-
Almost sounds like the comp wheel of the turbo touching the side of the comp housing or a pressure cooker going off that would indicate a leak
-
You could also run a hose from turbo to wastegate by passing the boost solenoid see if runs wastegate pressure just to rule that out. Also check the divid on the downpipe isn't stopping the waste gate flap from opening fully. Might even be faulty solenoid too
-
Have you noticed any high pitch noise when on boost under load? In the mean time add a pil some use mig welder tip. check the waste gate is opening/working via a air compressor. What turbo are you running?
-
Check the rubber hoses around the waste gate turbo haven't cracked or snapped off they go hard and brittle after awhile being subjected to alot of heat very common and would cause over boosting
-
Mind you the first visit to hpe I did drop the heads off to with a a4 size picture of the heads that had been chambered cnc'd got there in the end but can't recommend them. Cheers
do you know the volume difference between the 2? Im in the market for some v8sti heads if anyone can help-
Who's Online 0 Members, 0 Anonymous, 120 Guests (See full list)
- There are no registered users currently online
What have you done to your car today?
in General Vehicle Discussion
Posted
I've seen the thrust bearings pop off the pressure plate before