.jpg.12efe900eae214d65a356e12c14505b0.jpg)
gtlegacy
-
Posts
1,517 -
Joined
Content Type
Profiles
Forums
Events
Store
Posts posted by gtlegacy
-
-
haha sweet man txt me and let me know when you want it done
-
Bump
-
pmd you
-
bump
Can do anything electrical and mechanical etc etc
-
yea no problem flick us a text 0278637756 and we can sort a time
-
Hey guys sorry I havnt replied been pretty busy lately feel free to text or give me a call 0278637756
-
did you get my pm?
-
Hi guys
Anyone looking to have auto electrical/light mechanical work done A/H or weekends for good prices
Things fixed
installed or removed
codes read or cleared ABS ENGINE SRS lights etc etc
alarms, central locking, radios speakers amps etc etc
Lights, HID wof issues
Starters alternators
Can also offer LINK ECU installation, adaptors for wire in for plug and plug, modification or additions to set ups and tuning through another member on here
pretty much anything that involves electrical in a car
Flick me a pm or a txt 0278637756 and we can discuss
Mods please fix if im in the wrong category
-
Have you tried new from Subaru or ebay? Should be able to find that part number
-
ive got one
-
I had mine set up so the meth would kick in at 15psi approx and the tune would change to suit I had a level switch when the level was low it cut out the boost control and ran back on wastegate pressure 14psi (tune uneffected by meth 14psi<)
My meth injection was also progressive using a solid state relay controlled via link
Also in regards to the cornering hard question on my set up I ran the proper devilsown tank (link below) and where the level switch mounts it has an internal baffle and the pickup for pump was mounted about 1" below this
http://www.alcohol-injection.com/en/tanks/346-25-gallon-sumped-tank.html
-
Just found a massive flatspot on the inside of my wheel from chchs shithouse roads GGGRRRRR where can i get this straightened
I know of royce clive engineering, elite wheel and my old boss does them but anywhere else?
-
if no wof reg ?logbook and check?
-
lol do some work dave
-
I have probably just enough in straight 2.5" tube
left over from another project -
-
sweet glad you got it sorted
-
yeap lol I mght jst try some borrowed r160 stuff then in the weekend lol hopefully it works otherwise hydraulic handbrake time
-
have you checked the axles perhaps? have had the same problem with the rh axles the part that goes into the diff is actually different between the bc and the wrx and later legacys (the size of the BC spline is smaller and doesn\'t grip and skips around inside and makes bad noises) maybe your problem
-
was that the whole insides? apart from the shoes being r180 instead of r160??
-
Hey this is for people that actually know or been down this road question is
does r160 handbrake gear work in r180 hubs? reason I ask is I have r160 handbrake gear modded to suit brembo or Subaru 2pot rear rotors which are 190mm and I have v7 sti hubs that need handbrake gear
simply is it interchangeable between 170-190mm?
I would check for myself but I don\'t have the time to pull it all apart swap over and swap back
if it doesn\'t work anyone got any r180 handbrake assembly lying around
-
Bought some headers of stoffa and wondering if anyone from north of porirua area could pick up and bring down on a trip
pm or 0278637756
Thanks
-
Who has used these and what are your opinions? do they actually help with stopping the heat transfer ?
Reason I ask is I want to upgrade to something better than OEM because I have blown a gasket
What else is there out there that is similar?
-
AC Auto electrical 03 3384653 does alarms too I should know i work there
left over from another project
-
Who's Online 0 Members, 0 Anonymous, 153 Guests (See full list)
- There are no registered users currently online
Can you help a Wellington Brother out?
in Canterbury
Posted
Also bp corner of prestons road and marshlands road and in rolleston