.jpg.12efe900eae214d65a356e12c14505b0.jpg)
gtlegacy
-
Posts
1,517 -
Joined
Content Type
Profiles
Forums
Events
Store
Posts posted by gtlegacy
-
-
id say that would do
-
sure
-
yea fair enough its obviously not his fault
i jst thought of posting it up to make other people aware that it wasnt a genuine s401
-
gotcha
ok my first attempt probaby wasnt the best i have no other photos so this will have to do seeing most cant get to where my picture was taken the entrance would be okay for the tag
-
finally got a chance to fully clean and get it a good polish up after having owned it for over a year with my new rims on aswell
-
I think hes confused my mate has a blue subaru paid $7500 just like that 1 came with (like most)the red 4 pots those bbs wheels and is the same Blue isnt any faster than a normal b4 rsk though and no different
perhaps subaru painted the very last twin turbos this blue and up specd that up a little
-
Just for people that dont know
http://www.trademe.co.nz/Trade-Me-Motors/Cars/Subaru/auction-343516978.htm
dont these usually come with 6 speed brembos 18" bbs wheels sti dash steering wheel and different scoop etc etc?
http://www.sella.co.nz/motoring/cars/subaru/7270rx/?more_info
-
finally got a chance to fully clean and get it a good polish up after having owned it for over a year with my new rims on aswell
-
ahhhhh sweet thanks for the help
-
ok so if they have stretched what can i do then ? just smash heaps of sealer in there?
-
will be pulling off this weekend and re sealing
-
those two pipes from the loop section where the leak is at the top were very tight to get off when i originally put them on the car id say that the gasket seal would of scraped off when i put it in how do i measure the clearence ?
on or off the car ?
-
oh ok these ones were leaking badly first when they were cold but when warm they sealed but now they leak all the time you can feel it on your hand when you put it next to it
-
yea its the high temp gasket 260 had to riggle it alot to get it in so perhaps i need to put more in it to get it to work
-
heya,
i just put but x force headers on my car heatwrapped them as much as i could up to the slip joins
the slip joins have a pipe on the inside and the outside for better sealing but one still has a very slight leak when i put them on the car i put a bead of 260 gasket sealer in the join but still seams to leak a bit shud i just remove it again and try it with a ton more sealer?
also was told sealer better to use than exhaust gasket sealer/cement as its more flexible to use
its the pipe at the top and closest to camera at the 4-2 join
-
sweet as i got mine together and was running 19psi lol whats the general rule about adjusting the wastegate actuator arm ?
-
okay found the problem the exhaust housing had a large crack on the underside where the mount was on the clamping section got a new housingand measured it and the gap is the same its like the seat isnt deep anough of the collar where the clamp goes isnt thick enough but all lines up and had no problem with it wehn i ran it just has about 0.5mm gap between both faces
-
Rage is made my autobend in CHCH i bought mine from there 6 months ago and very happy with them and they arent to expensive and good quality mandrel bent
can buy from partsco.com or partsco member on trademe
the twin turbo set up they sell is either for manual or auto the difference is in the y pipe
the part numbers are BB3036 and BB3037 for the rage downpipes that suit all twin turbos and all are divorced wastegate type or siamese (seperate pipe for wastegate to help remove turbulence)
the y pipes are
BB3040 for rsb rs gt or gtb in manual 94-98 BD and BG
BB3105 for the auto versions of these cars
BB3042 is for B4 in auto
and im pretty sure that the bb3040 will fit B4 in manual but not 100% sure the guy at autobend reckoned that it does fit
also the mid section is all the same for BD and BG Chassis not sure if it will fit the b4 as different at the back of car
the actual downpipes are all the same and both have the divorced wastegate pipes that join halfway around the first bend
-
yea tried that but it doesnt seem to want to go any further even cleaned it up with a wire brush
-
i was putting my td05h 16g together tonight i have the exhaust housing off another of the exact same turbos as mine never came with one
anyways i was putting it together and i couldnt seem to get it to fit right up hard on the 2 faces for CHRA and the exhaust housing can get it to about 1mm and it seems to semi get tight but not really seat this isnt right is it?
as far as i can tell the small heat sheild washer thing is tight
-
ok my mate has a b4 that was auto tipronic with ej206 motor has converted to manual and used all of the manual parts including complete loom under dash etc etc
also has a ej20h bottom end with b4 heads and head gasket to get the compression correct or close to
we have been running 98 and testing we have had a few problems with check engine lights but have corrected them but still has airbag light on as broken clock spring on drivers side
anyways it was only boost up to 7 psi on primary and secondary which is wg pressure so we changed to the manual in gaurd solenoid and checked all the lines and they were correct the only problem is now we get boost and and it goes up to 16psi on primary and then when it goes to change over it changes and boosts up to 10psi then just cuts out and we get code 66 Twin turbo system but if u dont go WOT when it chnages it boost to 12 psi fine
we know everything works properly as before he chnaged the car over to manual with parts from his old manual b4 that he crashed it went fine
is it worth trying to use another black box to see if that is the problem has anybody experienced that before?
-
oh right so how would i run it using a v3 sti ecu and the twin turbo/v3-4 boost solenoid?
-
nah its for when i do my single conversion i have a sti v3 ecu for that
-
hahah yea wont love that so much im also using the factory tt solenoid box modified for single turbo this may come in to play as well somewhere
-
Who's Online 0 Members, 0 Anonymous, 56 Guests (See full list)
- There are no registered users currently online
CHRISTCHURCH TAG
in Canterbury
Posted
that would be mattapo