Jump to content
Please check your junk folder for registration emails ×

LegacyB4

Auckland Member
  • Posts

    45
  • Joined

Posts posted by LegacyB4

  1. I know alot of people on here from Auckland recommend Highbrook Automotive, and I have heard great things about them as well. I used Innovate Subaru in East Tamaki for a turbo repair job and found them quite reasonable

  2. Would an 02 sensor be a contributing factor? That issue seemed to come up alot on the UK legacy forum. My car is duue for a service, but its only 1000kms over due....Im sure that wouldnt be the sole reason drinking too much juice

  3. Another random question...this time about fuel economy.

    Now that my B4 is approaching the 200k mark, there are a number of issues that is popping up. Most of it is just general wear and tear and due to recent financial restraints, I havent been able to get on top of it. So its fair to say that things are starting to mount up

    However....I have noticed over the last month my fuel economy has decreased drastically. I normally would get around about 450kms from a full tank of gas, now I get around 300 - 350kms.

    What would cause a drastic drop in fuel economy? I love my car but this is seriously starting to get on my nerves!! Any advice or ideas to point me in the right direction would be greatly appreciated

  4. Hmm intresting...I been told by someone else that I need H1 6000K bulbs, I have brought a set a couple of days ago and they look right.

    But now I have a new problem...I have found the bottom of my inside headlight caps are screwed in place at the bottom

  5. I have just blown one of my HID bulbs on my B4. Im just needing to know which spec bulb I\'d need to use as a replacement. I have never had HIDs before, any guidence would be great.

    Thanks

  6. Something that I have been told recently: If you have a VF31 that needs replacing, you can use a VF25 or VF26 in its place, and vice versa. The housing is exactly the same, the only difference is one of the turbine shafts is 1mm bigger in the VF31....I think its the back one, but I dont remember

  7. Any advice or a how to guide for removing and installing a primary turbo for a BE5 RSK? Primary is a VF31, and is on the early stages of letting go, so i think it needs to be replaced. I want to do it myself but Im unsure of what to do.

    Any help, tips and advice will be greatly appreciated

  8. I have a 2000 RSK-B4 with a knock sensor issue atm, Its really gutless on acceleration only when the CEL light is on. Do you notice that your CEL is on while its not boosting properly? If so, it should return to normal preformance once the CEL goes out.

    To me, what you have described is a failed knock sensor, but Im no expert and this is my experience

×
×
  • Create New...