-
Posts
1,869 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Posts posted by Roo
-
-
That things going to look unreal Ross, love what you do!
-
-
It\'s not ideal but you gotta do what you gotta do in the given situation
-
Lol i had an ecu daughterboard installed for me once and they put it in 180 degrees out and my car wouldn\'t go.
What brand chip is it?
-
-
The soarer guys love them they just pull the fuse
-
-
Put a fuel pressure gauge in and started it up. Seems up like 4psi, could be the source of my plugs fouling
-
I see why you want to do it cause i\'ve been there lol
You can build a rwd subaru cheaper than buying a nissan and end of the day it\'s faster for less money.
They handle just like a rwd does, i never had issues with the diff or cv\'s personally but know of people that have a lot of trouble.
Appears the diff bushes get loose and the slop in the diff is hard on them. Replacement of the bushes or just bracing the diff to the subframe would be a good way to prolong the life of them.
Also your driving style will be what helps it too. Go faster so you don\'t need to clutch kick so often since you\'ll be carrying the speed
-
More damper adjustability than d2\'s. My civic had bc reds when i got it and i run d2\'s in my laurel. Probably hard to make a comparison since the civic was set for a soft ride and a reasonable height and my laurels like 40mm off the ground and stiff as possible.
I would rate the bc\'s probably, always hear good things about them and often hear of people selling sets of d2\'s with one blown strut
-
-
Ross you need a sandblaster!
-
Gearbox bolts tight?
-
-
Woah!
Highest i\'ve seen (other than commercial trucks that have done over a million km\'s) was a landcruiser that was coming up to the 700 mark
/quote]
Drove my landcruiser from 60,000 km to 460,000 km in just on 25 years pretty much knew that truck inside out and upside down still have it not sure what I am going to do with it to be honest
now have a hilux which I am adding K\'s to at an exorbitant rate,
I think with that kinda use you\'ve had your moneys worth out of it so you may as well keep it
-
Woah!
Highest i\'ve seen (other than commercial trucks that have done over a million km\'s) was a landcruiser that was coming up to the 700 mark
-
-
ADIKT']
Te37s been sold to a mate and on his leggy! Currently looking for some 17s before i get booked in for a cert! Marc only has 1 set of sexy 17s back so no go there!
[quote name='ADIKT said:
Looks good spencer
How much you pay for you bc golds?
/quote]
Got it off marcs race car for like $500 plus a couple clevis and a strut so owes me $800ish!
Im looking for some good but decently priced adjusties... not sure I wanna go brand new yet
I planned all along to go new, ended up buying near new second hand at half the price. And after a hard drive, i don\'t regret the decision whatsoever!
-
Te37\'s and lower!
-
-
Drove the race car to work because ima baller and i do what i want
Lol no actually my other cars out of rego so i get to hoon round in the integra for a couple days
-
90psi is the maximum pressure a pump does. At least you know it\'s in good condition
A reading like that is the result of the return line being blocked/crimped/something not letting the fuel through
-
-
Yeah that\'s how they go. As long as you have the coil the right way on the manifold
-
Who's Online 1 Member, 0 Anonymous, 186 Guests (See full list)
What have you done to your car today?
in General Vehicle Discussion
Posted
Went to fit up power steering pump bracket, found I can't get rear bolt in since it goes right behind one of the runners for the flows, by then I had reached my quota of what I could be bothered doing today so I left it at that, another day lol