Pappu1

nice!

damm that sucks

Any chance it\'s a bigger turbo? Any leaks etc that may happen when on boost How is the intercooler condition? Does it make any other noises just before cut? What Abt loom wiring any cuts or stuff like that u can trace?

Yea I was also thinking whT if map sensor is over reading Wud it be safe to assume the map is same as the early shape RS legacy?

So it still cuts at times on 7psi? Umm can u try it with maybe a full tank of gas? Just wondering if it\'s fuel surge Try running 7 psi on a full tank of gas and see if u can make it cut now? Also just as a check how is the health of ur spark plugs and coils?

Boost cut maybe then Ok so Wat all mods? Can u lower boost somehow That should sort it. Start there anyway

When u say it hits a Cut does it feel like say someone pulled the handbreak As in a massive stopping force Or Does it feel like the car is spluttering sorta struggling to live Cos depending on ur answer it

on a vf30?? but the stock setup does not get to 20psi.. around 18 is what the stock setup is... i think ur referring to ur vf34 and some mods thrown in? stock v7sti wont bro...the stock tune is not that aggressive at all on the low rpm end to do that did u get ur one to surge on a full stock setup tho??

bright! how many watts?

hahahah im sure he is not doing that kinda antics hahaha but that wud be pretty epic but tbh i really dont think a stock v7sti will surge even if u tried that .. they are tuned pretty slow....

but when having the ebc off - does the car feel slower (as compared to having it on)

does it slower when ebc is off? (possibly lower boost)

on solenoid off does it run wastegate pressure? cos if u can confirm that on wastegate pressure u getting the noise then it wont be surge..at least that kinda points to other things anyweay do try a vid man...

just saw vid... yea man +1 on checking hoses..maybe take the manifold reading on same place as the boost gauge (nice install by the way!) also clean the solenoids perhaps (does it have filters in the vac lines?

Still covered under warranty bro? I know a mate one played up and was a bad controller unit which was swapped under warranty Nd worked ok after that... Not see vid Yet as on ph atm

That will be a first but yea could be .... Lol y not... Have gotten a cheap tap to surge on a v8 so this cud be in the relm... If u change ur settings to say lower duty cycle - does that still do it?

Yea man was thinking that but on a stock tune it will be near impossible as it\'s not aggressive enough ....

Hmm maybe as kiwifoze said may the boost solenoid Is there a way u can relocate the solenoid and see if makes a difference in sound Also maybe the up pipe gasket but that is there all the time u set boost U don\'t have any boost or vac leaks u can see? Maybe tighten all hoses and bov etc as a precaution anyway

Any chance of a video of it The sound I mean

I have had different height springs on front and rear as to keep the look even out Have had to to that the rear is lower than front ( wheel to guard area) and lowering them the same mm makes the rear look saggy Went with 25mm front and I think was 10pm rear to gt the same height front and rear (or something similar as can\'t remember the exact numbers) Anyway don\'t like the look of heavily lowered gdb shape just slightly lowered as the guard gap is a horror in stock form Also have driven extra lowered ones and the handling is not as good If u wanting to hit the track as well as keep a decent looks just get some nice adjustables and that way u can set it up to the way u want and cAn get camber etc done to suit ur liking etc

Can\'t change seats that have built in airbags Unless put in replacements that are approved And still need cert for it

hahah u guessed it right bro its deep but not lod and is pretty much straight thru 3 inch! seen it on 300kw car as well

i can get u a 3 inch setup with a 4.5inch tip and 300kw+ support and 100% wof legal even at vtnz or the strictest suby hating wof man

It\'s the same pod filter on both old an new setup Just went for a quick ride Hmm there is a suck noise but it\'s Abt half or less in volume And not as aggressive as before

Hmm thts what I thought - bigger pipe = Lower noise Altho seems ppl here have had more noise Pipe before was silicone and now is alloy