pl0x

Once again get it setup properly and you should easily do just as good a skid as any skyline/supra/rx7 etc, got a nice vid on my phone of my wagon alongside my mates s5 rx7 both smoking the bags, can you post vids on here? how? Yea comon a subi baking it up and showing up a skyline or something would be great!!

My mate has some sti 4 pots sitting on his floor that i was thinking of grabbing off him, will these bolt straight onto my rotors? he said they wouldn't and that id need bigger rotors? my car is a 95 rs legacy (BD5)

Yea thats what i was just thinking? looks like you have no inner gaurd aswell?? do you just not drive in the wet?

I agree.. i like subi's but rwd also I would much rather have a rwd subi than skyline etc i just cant get enough of the subi rumble lol

Pros: FUN!!

Anyone know how to change a powersteering pump? im pretty sure its stuffed as powersteering is not working and fluid is full and looks good Do i just need to change the pump and reconnect lines or do i need to bleed it etc, if so how do i bleed it

Oh ic well thanks for that, yea my car has a switch for it but its not hooked up right and was thinking of getting going but nah i think ill leave it as it is lol i love the backfiring sound between gear changes lol

mine has both connected not sure if its right but it works it must have a spilter before the wasty or something because its only the one hose heading down there... ive never really checked it before

Ok i get the concept having no lag but how does it work?

its either a IVC or ICV idle controll valve pics on how to and sticky maybe? Yea i know there use to be, someone mite have to write one etc

So what is the ICV and how do i clean it?

I thought exhuast & all other non-structural parts had to be 50mm or 70mm (i cant quite remmeber) but im sure there was a certain height it had to meet?

ive been told ur aloud below the 100mm? and if its certed for it then thats fine? ive a toyota soarer that was so low it sprked its exhuast everywhere, seen it get pulled over heaps aswell, never got a fine coz it was certed tho? mite depend where you take your car for cert

Hmm if its just for steady boost control then u mite want to lean toward a EBC i had a wasty + a link controlled boost tap, the spring would always hold steady but with the boost tap in there it did all sorts of things, ie it would hold steady 7.25 psi when boost tap disconnected, (link was set to run 19 then drop of to 16psi) but it would spike up & then drop then go back up etc

i think just take it in at the height u want chanege it if u fail and u get rechecks for free? duno the height, im sure ur aloud below 100mm though

I havnt had a cert done but from mates i know theres one in hams unsure of the price but he was really tough and wasted a shit load of my mates time and money by not telling him all the faults at once, he had to go back and forth 3 times which is 150kms each way. also there one in tokaroa which is quite good ive heard decent price too and one in rotoarua which is cheap ($350) but unsure how tough he is. there use to be a list of cert prices be4 the site crashed

I dont see why they wouoldn't if you set the adjustys high the will fit, mite not if you have them low, mite need to roll your gaurds etc hassles with lvv is $$$ Advantages: stiffer & better handling, adjusting there height & rebound settings etc Disavantages: once certed at a high you can only move them +/- 5% of that high, stiffer - bumpyer ride

yea, only problem is how the hell do i plumb back this:

If they cant police external wasteys there not going to be able to police this, its all going to come down to warrent time...

Oh it doesnt vent, but you can hear it through the pod

This is true to a point, your internal wastegate is good enough but if your after the sound of an external or want to up boost without a tap or EBC then you can change spring pressure etc BUT people say only buy genine wastegates which are about $500 for brand new tial 38mm, which is a lot if your only using it for boost control, and its not easy to change boost like a tap or EBC What are you planning to do with it? have it plumbed in or Venting? Up boost?

Hmm mite have to take it off and see if the idle comes right? i was just going to leave it on as its not doing any harm on there

Mines already up as tight as it can go? i wouldnt say its loud, i dont think the cops will go pull you over for a b.o.v unless its super ssq or simalar, unless they are just out to get boyracers or wanna do you for whatever they can etc

no i dont think so? hmmm maybe you do? well i was no help...

Yea there not going to be able to police it, if so there going to have to do what aus did and ban pods aswell, i dont see it working tbh most of the noise in mine come outs tha pod unless your revving high but with mine (turbo smart vee port) it lets off at very low boost i.e if let off the gas at 1psi mine would still make a noise