Bugeye01WRX

No that is at the flywheel so 250whp roughly I think, used a bhp to who converted so could be slightly different. Not sure on the TCF sorry. Still extremely happy with it. Hi there yeah it is flywheel, but really stoked with it on a stock TD04 and engine with 205,000km. Car feels really good, smoother and just much nicer to drive. The biggest improvement tho is car pulls all the way until 6,250 rpm, whereas before it peaked somewhere between 5k - 5,500. Having that awesome feeling of the car hitting 5.5krpm and it still pulling harder is definitely an awesome feeling :D. Thanks man yeah completely new car love it!

Hey man got it tuned by WRC Developments. Graham was fantastic! Made an awesome 302hp (222kw) on a custom tune with stock intercooler, stock turbo and stock downpipe, up from the 240hp it was. Pretty happy with outcome!

Crap sorry! I wrote this post from work which was automatically logged into that account! I was told I could merge them so I'll sort that out tonight. Oil consumption has been fine I had car cleaned recently and it is getting looked at next week to see where the small leak is and I'll sort it then but it is a very small leak. Definitely not using a VPN sorry i logged in from work today but as I said, my apologies will get it sorted tonight! Hey mate will let you know if I end up using it :). At this point it is probably going to be not using it. It is in pretty good nick could send photos for you if I don't end up using it. Cheers

Hey guys!! I'll Try to keep this short. Getting a custom tune in a 2 weeks which would be akin to the US "stage 1," so not doing any aftermarket parts like downpipe etc. At this point I am doing just a reflash and upgrading fuel pump. Only thing I am still tossing between is if there is any point in upgrading the intercooler to an STI one? I have one but if it is a waste of time then I wont bother doing it as I can save the funds. Also, I read that the STI intercooler can sometimes wear through the AC lines. I mentioned this to my tuner but he had never heard of it which concerns me. Car will be roughly 270 - 280bhp once it is tuned from tuners estimates but obviously every car is different. Basically will be a 20 - 30hp increase over stock for my bugeye. I already have an STI TMIC in my garage and also have the Version 8 scoop fitted to car because I like the look. I would only put the STI TMIC on car if it is worth it otherwise I wont bother. At those levels of power on a TD04, probably running around 16 - 17psi after tune, is the stock WRX intercooler more than fine? Also, pressure drop I heard is 2-3 psi. Does anyone know if the STI TMIC is better? I don't have a splitter yet tho so would have to buy one of those if fitting the TMIC is worth it. Thanks!

Thanks man and yeah I will look into it. It has not been an issue since I topped up and it is weird as the engine never chews oil and I topped it up recently so will keep an eye on it and get the sensor replaced. Cheers! Haha I feel you man. It is weird tho as it has never consumed oil before. If it continues to do so I definitely wont tune it and will get that addressed very quickly. Cheers!

Haha sweet! yeah it was concerning me as well as I definitely topped it up, although I did take car for a very spirited drive through some windy backroads for an hour last weekend, probably more than she is used to :P. I'll definitely keep an eye on it but thanks for letting me know about the oil cap. What about if oil is overfilled? It was sitting probably 5 mills above the full "hole" amrker. Should I drain it or should I be all good? Cheers

Hey guys So I turned my car on today to go grab lunch (Bugeye WRX), and I noticed the oil pressure light on which was weird. I checked oil and it was really low for some reason which was weird as I topped it up a few weeks ago and my car never really chews oil, but regardless, I topped it up and then drove 5 mins down the road to grab some lunch and came back. I got home and realized that the oil cap was off as I forgot to put it back on in my rush to get lunch and now wondering if this is bad? I researched and most said that oil would piss everywhere but this did not happen to me I checked under hood and engine bay. Should I be worried about any damages? The pressure light or oil level light was not on during the drive but I did notice the car was driving a tad rough (almost felt like a slight misfire), but it might have been my imagination as no engine light or anything came on. I only drove for maybe 5 mins, 10 mins at MOST and I was just cruising as it was raining. I assume the oil filter would have captured any contaminents? Am I all good? Also, any issue with slightly overfilling oil? I usually never worried if it was but just thought I'd ask. It is sitting just above the hole in the dipstick that indicates full. Cheers!

Yeah but I wanted a little more out of it and for $1,000 I can get 20 - 30hp as well as some better torque. For a year or two I think it is well worth it Insert other media

Not quite going back to study next yeat and have decided to just spend $1,000 and get a retune. That'll do me until I can get an STI in a few years.

Haha thanks for answering my queries. I'll do my best to move on and try to forget about it and look forward to getting car tuned in 4 weeks :). Last question, if the engine was detonating and I have not noticed any adverse affects yet, if I fix the issue then I should hopefully be all good going forawrd? I understand the engine can go boom at anytime tho so gotta be prepared for that.

Oh jesus now I feel worse again. So you saying that the 6 months or so of driving without it could be causing detonation? Is there anyway to know if I have done damage? Any tests or anything I can get looked at to see?

Cheers man yeah I do panic it is part of my personality can't help it haha. Oh well that makes me feel better yeah I can put the splitter back on no stress I was only worrying about long term damage or any damage I could have done. Reason I was stressing was I asked my tuner and he said that it could cause detonation and knocking and I might not hear it and think everything is fine. Yeah I considered getting an intake temp gauge actually and I am also tossing up between putting an STI intercooler on. I have it sitting there and car is getting reflashed in 4 weeks so might just get the intercooler put on at the same time.

Haha good point! What would indicate that it was overheating btw? The factory temperature gauge on the dash? Yeah will do I am getting vehicle reflashed in 4 weeks super excited so finding out I have been running my car wrong was a kick to the stomach haha. But basically I can stop worrying about any damage as if anything was wrong I would have noticed a loss in power right? Also if it was running hot and pre ignition was occuring the ECU would retard the timing/richen the mixture correct? So if the vehicle was not getting cooled properly then the ECU would I guess prevent engine damage to an extent? Am I correct there?

Yeah I should have realised I just thought the bigger scoop and having the WRX splitter was pointless but I see I made a big mistake. It has been like this for 6 months, would I have caused any long term damage? Or would it just have caused power loss if there was issues with cooling?

Cheers I'll put the splitter back on tonight. Any long term issues the more I read the more worried I get as a lot of posts are saying that most of the air wont even be going through the intercooler and I have been driving without it for 6 months! I just hope I have caused lots of wear on my engine or turbo etc? The car has had no issues last 6 months so would I have noticed if there were issues already? But I will put it on going forward

Hey guys I have a V7 WRX and put a Version 8 STI Scoop on the vehicle about 6 months ago. Because the Scoop was much bigger, I decided to take off the splitter as I thought a lot of air would bypass the Duct and not even touch the intercooler. However, been reading and it seems like that is not a good thing to do? I have been running without a splitter for 6 months and car has had 0 problems, but is this bad long term? Also, can you use the WRX Splitter while I have an STI Scoop? Is it better than having no splitter at all? I have a stock WRX intercooler. Cheers

Hey guysI don't usually rev my engine in neutral ever as it has done 200,000km and is a bugeye WRX. Had some friends around and they wanted to hear it and I revved it to 3k rpm in neutral maybe 4 or 5 times. No further than that and also car was warm as I had been driving in 10 mins before this happened.I read that is not necessarily good to do while engine is unloaded but I assume a few revs to 3k in neutral would cause minimal additional wear correct?I am just wondering since vehicle has high km and also going to get it tuned soon! Cheers

AH yeah the WRX trunk has weaker torsion bars so that is probably why mine slams haha. But no difference in the 4 bolts if you only used 4 bolts it will have the same stability as my WRX boot, just different torsion bars.

So you also only bolted in the 4 bolts? Do you use a WRX trunk as well?

Hey guys Just had a few questions regarding STI Spoiler. I put an STI Spoiler on my 2002 WRX about 5 months ago. I did not think anything of it until recently when my boot accidentally slammed and I heard a cracking sound or some sort of weird sound. I then researched and found out I should have either replaced the trunk or at least the torsion bars which I never did and now wondering if I should. When I installed my spoiler, I installed the 4 bolts that the WRX Spoiler fits into, and then put some adhesive under the spoiler where the other 12 or so bolts would go as well as around some other places. However, in my research it seems that a lot of people are saying you need to install all 17 holes but a lot of people are saying that they have done the 4 holes only. In my experience, installing it with just the 4 holes and some adhesive has held up really well and I have not had any issues. I have the following questions: - What is the likliehood I damaged the Spoiler from dropping the boot with only WRX torsion bars. I usually lower it gently but I knocked it by accident while working on the car and it crashed down hard and I am worried I cracked the spoiler. I cannot see any external cracks but I am worried about internal cracks. Is that likely or am I overreacting? - Should I be drilling more holes or getting an STI trunk, or if the 4 holes are holding up well will that be fine? - Are the Perrin Stabilizers worth getting? Sorry for the long question!

Haha cheers :D. Car is going for a tune in January so super excited!

I know man sorry it is just my anxiety I am quite a perfectionist when it comes to things I own I hate having s*** damaged. I don't even park my car next 2 cars as I am scared people are going to open the door on it haha. Sometimes it can be a burden...

Hey guys! Just got my new High Flow Downpipe in the post today and was super excited. Stupidly, I packed it up to put away for later and forgot I cut the bottom open, so I picked up the box and the entire exhaust came out and crashed onto my garage floor. Only probably from half a metre up so i am not worried about the exhaust as it is strong stainless steel, but wondering if I could have damaged the Subsrate of the catalytic converter? It is a 100 cell metallic one and I had a look I can't see any dents or damaged "holes" but if something was damaged slightly, would it still work? And is dropping it from around half a metre high onto concrete floor likely to damage the catalytic converter materials/honeycomb thing. Cheers

Hey Been driving it today and I notice that when I shift into third from 2nd or 4th it is making a kind of noise. It is hard to explain and it is not very loud but it sounds ling a "ching," noise, like 2 bits of metal clanging together very quietly. The car has always done that when changing into 5th gear but never in any other gear and it is usually quite quiet, however it is now doing it in 3rd gear which is the gear i accidently slammed and it is quite a lot louder. It is still not easy to hear exactly, but it is making me anxious. So I can prepare, I am getting my car tuned soon to run about 250whp which I know will put more strain on trans. I have done some research and it said around 300bhp or 250whp was the upper safe limit for stock WRX 5 speeds. If the gearbox does go, what should I replace with to keep cost around $1,500? I don't really understand the options as it seems like you can rebuild, recondition, replace etc. Do 5 speeds from say a Hawkeye WRX or a 2012 WRX fit in? Are they better to put in? Is there another option that would be a slight upgrade at not too great a cost? Cheers

Hi I would be keen to get a 5 speed off him myself. Can you put me in touch! Cheers