Joker
-
Posts
25,590 -
Joined
-
Days Won
154
Content Type
Profiles
Forums
Events
Store
Posts posted by Joker
-
-
Sorry not much help but thanks for the updates aye
someone else might run into this in the future etc
best of luck
-
I think AVS had the 8-Dip Switches?
so ya just matched them up?
could be wrong : never had one
Not exactly regarded as *HIGH* security by some ❤️
-
Location? Or take it to a Sparky Aye that shouldn't happen, you could try find the Brain & get the Manual Override code I think those still have them (or remove / bypass it)
-
QuoteE&H Motors Pukekohe
Important note.. unfortunately Gull Force 10 is being removed from a lot of the Gull stations. This fuel was by far the best pump gas and any cars we have tuned to run on Gull Force 10 98 octane only will need the tune checked and most likely some ignition timing removed. If your car was tuned to run on Gull as well as Mobil and BP 98 you will be fine. Please call us at work if you are unsure if this will effect your car.
Thank you, team E&H MotorsFrom a Facebook Post this week
has garnered a fair amount of comments and reaction's
-
I saw a Rumour on IG that e10 is being Phased out in 2024?
cant confirm at this point in time but I'm searching for any mention of this
-
1
-
-
1 hour ago, Andy_Mac said:
The body is already an 01 WRX so should be adequate for cert purposes other than hoops probably
Non Turbo WRX year was 2001
though, yes appears I confused myself : carry on
have fun!
-
Hardest Part : not sure if you've considered it, will be getting it road legal aye?
It'll need a Cert which may include Brakes, driveshaft loops and even a Gearbox to handle it?
eg the main reason most will say sell it & buy a Turbo Car
sorry to be the "fun police here"
-
1
-
-
jury's out so far but yep not a .co.nz email address I can say that much ❤️
-
20 years next yeah huh Elite Auto?
I had a 'fancy' digital Fujifinepix 5megapixel? Camera with no Microphone
-
I would also hazard a guess the internal Solder joints on the boards have gone dry & broken
the 'old trick' was to Bake the circuit boards & re-flow them (not tried myself & sounds crazy at first)
a common problem with fuel gauges of that era
also love ya username LOL inventive even if cut short
-
Other than speed sensors woes, yes?
5 Speeds are all very similar
I understand Later have 8x bolt Bellhousings and you'll probably only have 4x?
6x Speeds are different length? (use Auto Driveshaft?
I'm sure there's a sensor solution written on the forums somewhere
again newest Subaru I've owned was a 98 BG5, and I've never got that Mechanical
this is just from my form lurkings & Learnings
-
"Everyone" that was a member of the old forum has the same Join date in 2009 as that's when this version went 'live' ❤️
thanks to @funkytown @Odie at the time iirc sorting the structure out
-
10 minutes ago, boon said:
It was dereg'd in Jan' 2012, as above not looking great.
ahh bugger I always skip that part & I was waiting for someone to pull me up posting the 'wrong' Rego too hah
QuoteCancellation Date Of Registration: 03-Jan-2012
-
17 minutes ago, Craighydes said:
I was the first owner of this car it came to NZ. I would like to know where this is now and if it is still a runner.
the most basic check is Carjam & sadly is appears from the public view I can see last WOF was 2009
https://www.carjam.co.nz/car/?plate=ARH135
so no, sorry not looking good sadly ❤️
-
1
-
-
3 hours ago, THUNDA said:
🙏 thank god this info is still on here, I finally have a bc5 which door beeper is working - will be doing this after work
you're welcome ❤️ hah I'm doing my best wit ha few others to make sure this info is never lost (again) and be on the internet forever hah
-
1
-
-
ooh : technicalities LOL I'm still learning to speak WRX
-
3 hours ago, THUNDA said:
I might need to start saving gen 1 legacy info on physical printed paper before I get too old 😆
we've got 3k in the CS Bank to cover Forum Costs & its been steady for about 5 years now with Google Adverts turned on and the odd Subscriber : @ClubSUB.org.nz isn't going anywhere ❤️
but yep if its a Wagon ya want a bit more in the Rear & "most" up to V6? fits / is the same? : changing ya top hats?
gen 3 leggy "Only" the fronts are Similar (they changed the rear Design & used way shorter shocks?
-
1
-
-
2 hours ago, THUNDA said:
cant find anything in the mega faq
ditto : "only" suspension info I can see is this one : https://www.clubsub.org.nz/forum/index.php?/topic/35142-v3-gf8-sti-suspension-into-an-sf/
might take a but more searching ❤️
Actually I think Paul Started this thread to get it going eh
-
Ign Lock, getting it off is sometimes the hard part if you've never done it before
maybe have play @ Pick a part or inspect 1st
-
hah : it is? : top menu = FAQ
thats how I found it
-
10 hours ago, Andy_Mac said:
DOBC
Forums have also gone under
slightly viewable via the Waybackmachine though
but yeah a quick scan of our FAQ maybe?
the forums here also got wiped so nothing exists pre 2009
10 hours ago, THUNDA said:detailed list
this one? : https://www.clubsub.org.nz/forum/index.php?/topic/9305-jdm-wrx-ecus/
And this short thread is also in the FAQ : might have a snippet of info
-
1
-
-
Still a "thing" : does anyone have a set in NZ?
or seen them after a few KM?
I'd like to wish they are still mint, and Available...
-
1
-
-
Playday on Track added 100 new photos to the album Playday Manfeild 14th Oct, Pits & People.
and :
Playday on Track added 115 new photos to the album Playday Manfeild 14th Oct, Group 3.
-
1
-
-
1 hour ago, TNHSTI said:
I like how you replied to a thread 14 years old lol
awesome eh & a little bit of proof things on the internet stay on the internet ❤️
also small world
-
1
-
1
-
have fun!
thats how I found it
slightly viewable via the Waybackmachine though
-
Who's Online 0 Members, 0 Anonymous, 92 Guests (See full list)
- There are no registered users currently online
WRX 2016 Fujitsu-Ten Head Unit - freezing
in Impreza, Crosstrek and XV
Posted
a bit new for me BUT thanks for the Update and taking the time to post those details aye ❤️