scoobygt
-
Posts
550 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Posts posted by scoobygt
-
-
I have just replaced my front door speakers with some 6.5" 8ohm Vifa woofers that you buy for kit speakers, They sound alot better than the stock Mc'intosh ones I think, Now I just have to do my rear doors probably just get some good quality coaxials as you don't need component speakers behind you, Sub wise I have a 10" connected to the plug for the factory sub in the boot... the system sounds pretty decent for a factory head unit and amp I wouldn't change a thing.
-
The ej22e with the 9:7:1 CR has the pistons that protrude out the top of the block ever so slightly so what size thickness HG were you planning on running so the valves don't come into contact with the pistons? People run 18psi all day on the P1 blocks so your not going to have an issue strength wise, If you aimed for a final CR of 9:1 or 8:5:1 i'd say coupled with a TD05 running 1 bar or more you'd have a very fast Blighter
-
This is what I am basing my build on
-
The looms are the same and don't need to be changed
-
1
-
-
Well one would hope I did have a few clues seeing as I work for Winger and we deal with Subaru's every day.
-
I didn't even have to look at pages on the internet to know the answer, i'll just go back to being a mechanic then aye? good luck on you're search ya ****ing muppet.
-
I'm not going to browse the internet just to prove that I am right, If you seriously wanted to know you would look it up for your self instead of sitting on your ass picking and choosing who you listen to.
-
You asked what the differences were between v8 wrx heads and v8 wrx sti heads and those motors just so happen to be ej205 *wrx* and ej207 *sti* so unless i'm missing something here I told you the exact difference between those two heads.
-
Because I take reliable advice from people who know things not the guy wearing the fluffy pink superman jocks who has a quick google and hatches some half cooked generalisation they try to pass off as fact in relation to a specific version.
Good to see this site hasn't changed and is still full of cock heads like your self
-
-
How much are you wanting for the heads man?
-
EJ205 heads vs EJ207 heads... known differences are... porting / flow, cc rating of the dish, valves, cams ect
-
check this sound out!?!?
-
So not too much of a drama to cut and weld the rear section of the muffler if need be! Keep the pics coming of some of your bl's
-
Correction the auto bh/be legacy's are 9:1 and the manual ones are 8:5:1 how ever that's only the rev a/b the manual rev c/d are 9:1 so for you to do the swap your considering you'll need to use the auto ecu or source a rev c manual ecu.
-
Contemplating putting these on a ble legacy but am unsure of their fitment
http://www.subaruspeed.co.nz/products/muffler-ganador-legacy-03-09-wagon
-
fact of the matter is the whole car is a v3/4 even the exterior shows by this not having the face lift front and what not, i\'m not the one who needs to get it through my thick skull, just because it has a wee metal plate saying its a version 5 does NOT make it one!! clearly the whole car is a v3/4.
-
if you have any for sale or make them i\'d be very interested, thanks!
-
you have to ask your self why would Subaru change a wiring loom just for NZ new models?? The car is a v3/4 so in this case they should be identical if not then its just plain stupidity on Subaru\'s part.
-
yeah this shudder isn\'t normal its exsessive also the clutch smells abit, tbh my money is on them not putting the fly wheel back together properly!
-
can any one shed any more light on this?? hoping to take it back and be giving them some ideas as they don\'t think its any thing they have done wrong..
-
haha it appears to be on the strut brace as well..
-
do I see duct tape around the inter cooler piping?? :
-
sweet that should help us determine some things!
-
Who's Online 1 Member, 0 Anonymous, 59 Guests (See full list)
EJ22 N/A block getting boosted
in Engine Related
Posted
STP oil flush, Prestone radiator flush, and boost will clean that engine right up!