ARGHAYE

i cant say what you would pay to have it fitted, all depends what the person charges etc. AFAIK it will bolt into any v1/2 the engine loom should plug into your car and the ecu once again will plug straight in. so should be easy as. also no guarantee it wont fall apart, it is the old engine from my car i replaced it with a forged engine and it was a good runner beforehand. i would like to think it will hang together but i cant guarantee it. Basically i would use it if i had a car to put it in. if youre genuinely interested pm me and we can go through the finer points.

im about to sell my v1 Ra engine package includes ecu. pm me if interested. is located in wellington and i can fit for you at my workshop.

went to auto sparky today, easy reset with scantool! must have just been from having clockspring disconnected during swap..

Speaking as a wof inspector comments like that aren\'t helpful for anyone dude

Column never turned when out. Is all aligned properly so would be unlikely to have broken clock spring

Check alternator charge rate. Should be between 14 and 14.7 Volts when running. Can cause all kinds of weird problems if over or under charging

i think it must have logged a code during the single turbo conversion when i swapped steering columns, hopefully just needs to just be reset with scantool

allgood, off to the sparky it goes i think! ill post back with results!

thanks ross big fan of your writeups btw! but yea i have airbag fault not abs hehehe no offence

i will possibly be selling my single converted wagon in a few months due to lack of space... you definately not keen on a wagon?

Hi all The air bag light is on in my BG5 gtb. im trying to get the flasher codes to come out of it but i seem to be missing something. does anyone know the plug/procedure to make this happen? just want to make sure its not something simple before i take it to my auto sparky mate =) cheers Richard

saw it yesterday, looks to have been rolled is pancaked down to the window sills

a quick follow up on this, V2 wrx ra non abs has 1" 3 port legacy gtb has abs 1 1/16" 2 port they are the 2 i have looked at feel free to add more if you know sizes

hi all im looking for someone who has a gc8 with brembos on the front who is willing to let me try one of my wheels on their car to check clearance before i buy a set of brakes myself, im in lower hutt but dont mind traveling around. will pay in beer/ free coffee Cheers Richard

what are the bigger ones off?