patrickc22

Was thinking of getting this for the tune http://www.trademe.co.nz/motors/car-parts-accessories/performance/electronics/auction-1252279027.htm

hahaha i love the ps i have gotten a newish boost control solenoid from pick a part we will see if the fixes the boost still waiting for a reply on the tune but i have been looking at geting an aftermarket boost control solenoid i have looked into these 3 http://www.trademe.co.nz/a.asp?id=1252732049&cc=602&pid=490338217&hbc=&member_hash=&ct=title-link http://www.trademe.co.nz/a.asp?id=1252732049&cc=602&pid=490338217&hbc=&member_hash=&ct=title-link http://www.trademe.co.nz/a.aspx?id=1251183295

went to pick a part to day got things i needed but one thing i saw was a bh with tein springs

@A_J_T you said I should be all good ae @staunch_leggy just test it after Nats

I have spoken to @kwi_fozze He said it was the incomplete definitions He has put me on to a tuner.

You have got me thinking boosted go cart

I'm in Auckland found the module need to know what model for insurance ito could be 1 of 4

Tryed to find out what model alarm my car has with no luck

I have a stock one but I think that will work their is a guy on trademe from Australia that sells them

I wish my kick plates came like that

I think I have 6mm on mine

First name Ben I think

4mm

Dose yours look like the photo above few posts above

Do you have a rev d

So the obd2 scanner is bought isn't working so have bought another one hopefully this works

So back to normal as much as possible and on both turbos only went up to about 15psi but car would fell like it is serging and would end up getting limited to wgp check engine light came back on but can check it until I get to Auckland

Since you have a Rev b give @Rosssub Build a read

Hose 10 is back to stock as much as I can Have after market blow of value witch is vta will report results tomorrow

Do you think fixing the hose would bring it back down It did fisrt start doing when I did hose 10 mod Or should I give the sensors a clean

Yeah I will be replacing all of them to but the worst one it right before the intercooler once that is fixed it hopefully will fix the bosst issue

I have found an air leak witch I need to get a new hose for

So after getting a chance to have a good look pill 2mm and 1.5mm will be gone On another note my black car is ready to get a wof

The only one I know should have come out is 2.0mm pill do you know the exact location of the 1.5mm

Good morning all since going to front mount i am eather getting over 22psi or getting limited to waste gate pressure before i had done front mount and i did hose 10 mod i would get over 22psi but not get limited to wast gate pressure. Where should i start looking to solve this problem the previous owner told me it had a tune with this affect it in anyway and yes i do know i need to get a tune for going front mount just want to make sure my boost issue will not be their when i go to get a tune