Jump to content
Please check your junk folder for registration emails ×

Dre

General Member
  • Posts

    280
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Dre

  1. Do it properly with factory bilsteins and you will have no problems.When you put a lowering spring on a factory shock you shorten the available compression stroke or travel of the piston shaft.This also reduces the efficiency of the shock.You either shorten the shock shaft or if you are replacing a shock in a strut you mount the shock body lower in the strut body.Best to go talk to a good suspension guy.

  2. Actually that was me in a panelbeaters pulling my cars apart and putting them back together.I would only get the panel and paint done by the panelbeaters.I have repaired alot of gc8’s.

     

    They didn’t check that the airbag was connected correctly in the Outback.Drove the Outback in with no airbag light,drove the Outback out with the airbag light on and a damaged dash.

     

    The blame fulls on Subaru NZ for allowing Subaru workshops to do sub standard workmanship. 

  3. Unfortunately just like the car panel repair industry they are given a fix cost price to complete the job.I was told on a good day the airbag replacement guys can replace a airbag bl/bp Legacy in 1 1/2 hours.Judging by the state of my dashes in both cars this is true.I have replaced 2 x gc8 v4 and v5 twin airbag dashes back to the fire wall,heater and aircon and steering column 6-8 hours.Thats every panel,clip,nut and bolt bagged and then put back in the original position.I imagine the bl dash will take me longer.

  4. I’ve just had a recall come through regarding my NZ new 2007 Outback regarding wiring issues with fuel pump.After the issues with my Outback and Legacy,I don’t want to have it checked by the dealer.Dash in the Outback replaced because of damage,dash in the Legacy installed twice because of rattles.Small damage to Legacy dash which was repaired and poor fitting of center pocket/air vents.I was not happy with this so purchased a new dash at cost which I will install.Outback has air vents popping out occasionally.

     

     

  5. 10 hours ago, Andy_Mac said:

     

    None of the good stuff down here. Hence considering meth. Would be cool to see how far it can be pushed but any sidesteps just makes the engine/real turbo setup further away.

    @pl0x’s suggestion of a boost pressurised system is an interesting one. Have never come across that before, far fewer parts to potentially fail which is a big positive.

     

     

    I looked at Aquamist water/methanol injection awhile ago pre e85 available in Auckland and availability of flex fuel.Liked the idea of Aquamist because of the built in failsafe features.Because of the way the engine is tuned for water/methanol injection,if it fails you may cause engine damage.My thoughts on water/methanol injection,not really suitable for a daily road car.Probably better to do the job properly and build a better engine with the appropriate sized turbo or at least up size your turbo.

  6. I was looking at piggyback for the afm to run flex fuel on mine.Personally don’t like that method as I’ve had problems with other cars in the past.Looked at running E70 but didn’t want the hassle of mixing fuel and wanted to run straight petrol occasionally.Not using the Legacy much at the moment,manual and Auckland city traffic.Mostly driving the auto Outback,that flat 6 is a sweet engine.

  • Who's Online   0 Members, 0 Anonymous, 68 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...