Found haltech’s documentation for their tire sensors and canbus messaging so will add that as an option at some point. That way it’ll just appear in the ecu correctly as if it was their TPMS. Though haltech only supports 4 tires, so either I’ll have to
1) limit the sensors to 4 total not the current 16.
2) same as 1, but will still have 16 saved sensors and can swap between “sets” or 4. This would require either canbus or wifi config to tell what tires are fitted.
3) divide the 16 to 4 sets of 4 and send them to the 4 haltech locations. Eg send sensor 1,5,9,13 as first tire front left, 2,6,10,14 as FR etc.
By
Gripless ·