yellowsub

http://www.clubsub.org.nz/forum/index.php/topic,28448.0.html

you cant use the lops man its not gonna hold your baby in the same place read the post i posted that is the right place

http://www.clubsub.org.nz/forum/index.php/topic,18268.0.html

check your codes man sounds like your ecu is thinking you have no boost controlle ah and its hitting boost cut ( i fryed my ecu and mine did the same thing did you swap the wires over so ecu talks to the right one??

thanks man im gonna slap a resistor in the place of the factory controll and reset the ecu and see how we get on but thanks for your help

hummm just been out for drive in my car given in a boot full only to find out theres a funny sound under boost and feels like something is holding it from full boost so get home check codes it tells me code 44 waste gate control solenoid Solenoid inoperative now im running a aftermarket ebc with the factory boost controller still pluged but not plumbed in so the ecu dosnt spit a code lol dose any one have any thoughts how to clear this this is on a gtb converted to single turbo running vf30 turbo and 6s ecu help

http://www.stuff.co.nz/manawatu-standard/news/8158185/Racing-car-found-crashed-and-abandoned

have a catch can set up

hey guys toke the intake off my wagen other day and redid the fuel lines \'and have noticed there was a little bit of oil in the turbo inatke so im gessing the seals are on the way out whose the best person to redo them im running a vf30 turbo??

hey guys is any one in pamy after a few buck to swap some injectors over from one set of rails to another they are 440 yellows of legacy gtb??

well people after talking to grant the engine builder hes doing the repairs at his cost so on the 16 of July I did road trip to taupo were i meet grant and his side kick mark now these guys are ALLSOME :) :) :) I court the bus home friday the 21 july I did another road trip but this time to rotorua to collect the car not has only grant stood buy his work-shipment hes replaced both gaskets :) :) these guys are all some!!!!!!! i brought this engine 2 years ago the on going support from grant is outstanding i would recommend his engines to anyone

hey dose any one know if the fans should come on as soon as you start you car???? and if not what do i need to be checking or replaceing no codes at this stage

yes you need a reg on each rail you will need vacuum line to each reg just run one line with a t section the ends with out the regs are you fuel line in and the ones with regs are your returns its really easy mod to do if you do search for it im sure it will pop up other wise look at the form for twin to single for gt/b as its been covered many times in the form

11 Crankshaft position sensor Irregular signal received - 12 Starter switch Abnormal signal emitted from switch Turns starter sw signal to off 13 Camshaft position sensor Irregular signal received - 21 Engine coolant temp sensor Abnormal signal emitted ECU adopts a set temp. Radiator fans ON 22 Knock Sensor Abnormal voltage emitted Sets regular fuel map, retards ignition by 5degrees 23 Mass air flow sensor (AFM) Abnormal voltage emitted Fuel map set by revs and throttle 24 Idle air control solenoid Valve inoperative adjusts idle via fuel set by revs, vehicle speed & throttle 31 Idle switch (EJ20G) Abnormal voltage emitted ECU adopts a set throttle position value 32 Oxygen sensor Inoperative - 33 Vehicle speed sensor 2 Abnormal voltage entered ECU adopts a set value 38 Torque control signal (AT) Abnormal signal from TCM - 42 Idle switch Abnormal signal from TPS Idle switch ? 44 Wastegate control solenoid Solenoid inoperative Fuelcut when WOT at heavy load 45 Pressure sensor / Pressure exchange solenoid Abnormal signal from pressure sensor or pressure exchange solenoid inoperative Fuelcut when WOT at heavy load 51 Neutral switch (MT) Abnormal signal from switch - 51 Park/Neutral position switch (AT) Abnormal signal from inhibitor switch - 53 Immobiliser (if equip) Faulty Immobiliser system - 61 Inhalation valve solenoid 62 Exhaust valve solenoid (vacuum) 63 Boost pressure relief valve solenoid 64 Secondary waste gate solenoid 65 Differential pressure sensor 66 Sequential twin turbo system Somethings broke au! runs like poos 67 Exhaust valve solenoid (+ve pressure) 68 Exhaust valve duty solenoid these are your cell codes go though them and find the ones that have poped up and fix and clear

well up side i have e mailed the guy that did engine and grant has phoned me so have sent more photos though to him and said im not overly happy only after doing 10,000 kms and seeing the head gasket is leaking oil. lets see what the outcome is next prob is might have to do road trip to Rotorua, Bay of Plenty

rapid200sx os the guy that sells them for a guy called grant hes from Rotorua lol

gurr not happy this out come ill have to drop it into a garage and get more info

hummm surely there would be other signs if the head gaskets were gone ???

motor was built 2 years ago and have just clocked up 10000 kms

were you see the oil is were is leaking from dont thing head gaskets could leak oil

hey boys and girls have been noticeing a little oil stain under the car every time i stop now the motor has only done 10000 kms sence it was rebuilt and the catch is i got it off that guy on trade me for $1990 and have found out hes not useing GENUINE seals/gaskets so i have allready replaced the rear crank seal and the rockers seals in the last 2 years this leak is on the left bottom passenger side head and looks like its comming from head gasket any ideas people what seal it could be?????

dose anyone now if you can a new front intake wheel for these as i have chiped mine and its winning

hey has anybody had the chance to mix turbos as in vf28 rear hoseing with a vf30 frount ???? or something along those lines ?????

dose anybody know how to reset your electric windows on legacy????????? there is a web site i been told but cant seem to find it any help would be hugely helpfull