spoke to a auto sparky today he said to bypass the alarm by tracing back the wires from ignition and trying that but i will ring uniden tomorrow to see if there is a way to reset the alarm
there is 12v at three of the four terminals on the back of the ignition .but the exciter wire at the startermotor doesnt get power when flick the key to start
i wouldnt have thought so as car was operating fine for weeks with that issue. would the main ecu go into shutdown or somethung if it thinks the air bag has gone off?
no worries mate .
ive tested back of ignition and that gets power.as does some of the dashboard.i dont get power at tge exciter wire on the starter .which makes me think maybe the ecu has.gone into shutdown or safe mode? or maybe the alarm ? when i go from on to start with the key the alarm is clicking..
yea tis a bit aye cudnt unplug the airbag as someone had glue the plug together.
so thats why the wire was cut .
and i undone the gauge cluster only to take the bulb out .
didnt touch any of the ignition
it was definitely only the airbag it was the two yellow wires coming.out of the yellow sleeved loom is the airbag unit under the dash part or center console lift up bit?
hi 98 type r coupe
once i lowered the car the wheels rubbed through the airbag wires and brought the airbag light on which is ok.
so i got a aftermarket steering wheel and cut the wiring loom off the airbag ( with the battery disconnected.and also pulles the bulb out of the dashboard.
now the car has zero power only the head deck clock and door open light come on nothing else on the car works.
spliced the wires for airbag back together disnt work.
checked all the fuses inside cab and engine bay 3times
replaced the bulb
nothing makes sense can someone help me