Stoffa

+$400 for new oil cooler modine

Same way a GFB turbo fuse works i think

That was quick 4 days from Taiwan

One billet big16g

replace the knock sensor ;D

Have you tried GSS?

cheers, we were staying in Waitarere beach for a few days

very nice, but if you modify it i\'ll cut chew!!

Awesome, is it a pig to drive on the street? Or not to bad?

Im staying in waitarere beach till tomorrow, you can borrow my v7 sti valve or my adaptor plate on your tmic then you can use a stock one. (Got my spare bov with me) or search nasioc on modding the bov with a grub screw to stop the pressure getting to the other side of the diafram

theres one in able smith st next to ebbet holden

Did they stop you running after you got the 10?

one of these would make it work easy enough

my v7 sti one is closed at idle, it does vent when im cruising at 100km/h. swapped back to a GFB one on my new turbo, seems to work ok, Im sure its using less gas now as its not venting all the air at 100km/h cruise. it could also just be in my head as I have adjusted my lean cruise on the link

I thought td05h was a bit smaller? Heres the size of what im getting * In: 48.3 / Ex: 68 / Bore: 6.5 mm /10blades edit...found wrx td05 sizes on a trademe listing In: 46.5mm / Ex: 60mm / Bore: 6.5mm

Dont worry not spending crazy money on it but worth a try. Easy enough to find a tidy td05

Just got a message from snail turbo, the wheel is on its way. turns out the big 16g is extended tip as well, the same design as garretts gtx wheels. Ive had a bit of a search but cant find many results online. Does anyone know if the compressor cover off an evo td05 big 16g will bolt onto a subaru td05? Need to round up some parts to make it work

I entered a competition on facebook and won a billet wheel. I\'ve asked for a big 16G 10 blade, will find a tdo5 and get it modified to fit, worth a crack they normally sell them for $250US

ROST OFF FTW!! that shit rocks

http://www.speedtechnz.com/SALE 5 spots only

search mofo search http://www.clubsub.org.nz/forum/index.php/topic,6373.msg85125/topicseen.html#msg85125 I like this quote"Stoffa appears to have more knowledge on it than anywhere else out there on the www!!" haha

temp sensor is usually in the sump plug on the lamco\'s, oil pressure goes under the altenator, and no its not at a special tension setting, dont over tighten it, but if its too loose it\'ll squeel.

+1 G4 boost control is fricken awesome!! but I guess lack of inputs on a G3 for boost switch

If you looked like that joker id be on my way to dannevegas for a real hug

What do they look like on? not sure they\'re in the boot of the car still, still trying to figure out how to explain to the mrs why I need them. couldn\'t say no at $400