Got it working!!
Original ECU is number E3
Took it to APET here in Dunedin where I live.
Nik from APET changed some wires in the loom.
changed:
Fuel Pump Relay Control, Connector No. B134, Terminals 1 and 21 (swapped wire from one to the other)
which swaps with, GND (control systems) Connector No. B136, Terminals 1 and 21 (other swap from above line),(also said there was nothing in that terminal)
and changed:
Crankshaft Position Sensor, Signal (+), Connector No. B136, Terminals 5 and 6 (cut wires and soldered to opposing wires, <cut red and white ones and soldered white to red and red to white>)
which swaps with, Camshaft Position Sensor, Signal (+), Connector No. B136, Terminals 6 and 5
Hope that isnt as confusing as it sounds lol.
Will post technical data sheets later on when I can scan them into computer.
cheers guys
& cheers APET Dunedin