random breather

[sultan]

v1 block.

there's what looks to be a breather port on the engine block to gearbox bellhousing, beside the turbo. is this for the clutch? what's best to do with it?

[marc]

crank case breather, plumb it back into you intake pre turbo or into a catch tank if you have one. there is also a "T" or "Y" pipe that comes off it with a really short joiner and leads to the check valve under the throttle body. assumong thats still connected...?? (should be) then the other half of the T goes to what i said above..

[sultan]

there was this weird 3 or 4 way pipe connected to it that went into the intake but the other ports were all blocked off. possibly because it's running a link? i dunno.

yeah i do have a catch can that is currently plumbed to the breathers on the top of the heads i'll plumb this one into it too and should I make a connection to the check valve too?

[marc]

if you can be bothered and the check valve is still in there?? if there was nothing going to it they may have just put a bug in its threaded hole into the mani. if its still there and theyve just bungd the pipe or somthing id put the T back on the breather port and run 1 hose to your catch tank and 1 hose to the check valve. If its completly gone just run the 1 big port hose str8 to the tank .

btw yeh somtimes the early ones do have a few pipes off the breeather port as their intake pipe has like 50 ports for shit to go to lol. the later ones only have a 2 so you could use one of them to keep it tidy..