there's 1 that drives around my town hah :  I have to stop myself from following it "home" and chatting to the owner hah   the 'blocked off' type grill is a stand out identifier (Povo' / Nana Spec GC1)  

I know this isn't as interesting to many but this article   https://www.jalopnik.com/1976991/subaru-flat-12-formula-1-engine/   provides an 'unseen' dyno testing clip from Koenigsegg archives of the "Flat 12 Boxer"    as few details are apparently known it is of interest to those who are still learning about the "1235"    

Well the dinosaur board with custom tiny LEDs got assembled then other things for in the way.   All parts arrived for another project after a typically painful aliexpress not accepting returns for mislabelled products. the first of a series of 10 moisture sensor on leads with a central temperature, pressure and humidity combo for plant monitoring. Which connects to apple HomeKit so can be used in automation and remote monitoring.   So far nothing seems to remove the glue for the metal blocks. Acetone, glue remover etc all do ore damage to the case than the glue. The plan is still to have the shift lights by the end of November along with another ECU canbus expansion. But that might not be on a custom pcb by then just early prototype multi board. But the main code will be done which will make it fully functional.

Changed the lug nuts to spiked ones, 2 mins later swapped them back 😂. Definitely doesn’t work on the newer models.

(In the weekend): ooh aah