kiwisurf

Old thread bump but does anyone know if this works on the BL BP shape legacy? I have the amp out and it is different than shown in the photos? Cheers.

I have a 96 sti that I'm doing up so anything that helps with that

When you click on the Ken Gilbert link it brings up a 404 error message

Hi gents. I've done a search and the link on the mega post no longer works. Can someone post a link or email me a copy of a service manual please. ...particularly the engine section? Cheers

Poke a bit of wire up it....(coat hanger or welding wire). And you can also VERY gently blow up it with compressed air.

500ml is plenty....I have a vacume brake bleeder you can borrow in Hamilton.

Yes....using Gulf Western Syn Trans

I run ATF in my BP5... Was notchy and horrible before it...still need to do one more change so any residual gearbox oil is "flushed" out. Much smoother now! Was recommended to me by a gearbox and transmission guru in Hamilton.

Have you got a leak somewhere in the system??? Air getting in and locking the pump?

You wont even get looked at if you list it that high. I personally would $1 reserve it... especially if your looking for a quick sale. Otherwise start at 6k and work down from there. Myself and another guy on here both recently sold RevD wagons...mine took quite a while to sell until I finally found a buyer who knew what he was talking about. The other guy had several buyers pull out on him.

I use Extreme\'s in Hamilton...way better than Repco!

I don\'t think those ones can be....you will have to have a look to see if it comes apart. On my old BH5D the answer was no but I did manage to shut it up by lubricating the shock rod. Jack the car up, lift the shock boot out of the way and apply some lithium grease to the shock tube. Got to be worth a try anyway!

Its most likely just got the wrong oil in it....they change alot smoother with ATF (automatic transmission) Fluid in them.

http://www.trademe.co.nz/Browse/Listing.aspx?id=571367957 I got these for sale cheap....was quoted $45 a wheel for powder coating.

Pop the air vents out and put them behind there...perfect place for sound staging!