tydon

best method of bleeding brakes? just converted to 4pots

ohhh yeah these spokes dont really have any slope and are quite flat and stick out from the rim sooooo heres hoping that they fit but hey like ya said if they do they do if they dont then looks like il be needing new rims.. or sell the 4pots

welcome yes clubsub otago is also quite quiet to hopefully we can get things going and get something sorted for southland/otago nice car btw!

yeah mines got the 17x7JJ stamped on inside of spoke then another with 4/7 ET stamped on another spoke

hmmm on the back of the rims i have a marking that says 4/8 ET is this the same?

ok so ive done some research on what will cldear 4pots but not alot has come up and theres alot of stuff on not all 17x7 clearing 4pots on some mags depending on the angle of spokes etc, what ive got is a set of advanti racing star 17x7 ive measured my offset which was a little hard with the tyre still on and come up with +42 now im not sure but im hoping these will clear the 4pots. Now if they dont i dont really want to or buy new wheels. Im wondeing if they dont fit if a set of spacers will help? anyone been down this track ? any help appreciated cheers

i think the offset on rims are +42 if this helps started a thread here http://clubsub.org.nz/forum/showthread.php?44605-Clearing-4pots&p=563802#post563802

just wondering if my advant Racing Stari 17x7 mags will clear 4pots? how can i tell without fitting them?

Later model cv joints 2000+ are the axles thicker than the older model ones I got some BH ones that had the abs rings on them but I've been told you can still fit them in older models I've taken the abs and dust ring off and they look like they'll fit no issues

can you convert a Auto BG5 dash cluster to manual? only asking as i know of an STI 240km one and really want it except its auto and i need manual.... could i pull covers and swap them with a manual one ?

I was under impression v3/4 sti had factory forged pistons and rods? Hf3 pistons

Is that because shortblock is open deck?

Will it make any difference if it's sti?

Would a td06 20g be to laggy on on a standard v3/4 setup?

has anyone had any of there exhaust parts coated with HPC? looking at getting downpipe done

cant be to much weight lol not noticable? must be ways around keeping the seals nice and mint its really refershing having them wasnt a fan till i got them wouldnt go back afterwards

yup got that lol anywyas heres a pic of my Ltd picture quality not so good but hey. Also reuben howcome you werent keen on the Sunroof models? with the factory tinits on the bg5 ltds its quite dark in the back sunroof really lightens things up

the yellow one the guy seems to think its a genuine bd5c heres a link to it is this the one thats modified to look like a ltd? http://uk.subaruownersclub.com/forums/topic/1623-my-car-in-banzai/

just wondering loom came with IAT sensor im gunna wire one in to the ecu in my conversion may aswell make use of it

what sensor goes in here?

haha guess theres only one way way to find out haha

are these the dash cluster plugs? im thinking of just doing the cluster and converting to mechanical speedo cable

yeah just had a good talk with keith down at wreckers and he showed me howmuch of an effort is required lol so yeah no longer going to attempt this to much work and theres alot of differnt chassis plugs door panel loom headlights etc