DRFVDR

ok as u know it is a 1990 GT wagn factory 5 speed(bonus) the ej20t on its way out donor engine number one with SVX in need of gearbox in background donor engine number two(just incase) actually it the jetboat one but it is a spare at the moment rebuilt 5 speed gearbox we had lying around(was originally going in the SVX but we decided against it) oh just a spare closed deck ej20 block i think it is one of 4 we have a spare SVX radiator Some soon to be spare bits

update no pics as yet i suppose i better go take some the ej20 is on its way out the eg33 and rebuilt box sittin there ready to go in the radiator wont be an issue will move it further forward and put pusher fans on it ...... pics to come

now the outback looks quite nice lets just get that and lower it heheheheh

I was driving the said Legacy when the rattle appeared me thinks an eg33 is the go :)

loose caliper bolts ???

so if I take a wheel of my rx does that make it a trike then I can have a 100 db limit

Knock sensor(it is a guess ) Coils are my estimates

yeah about 10 years worth

and just to make it clear when rick says each side he means left and right and either both in engine or both in gearbox is easier and yes I have seen this myself it is not just a subaru thing nor actually a gearbox/engine thing either I have seen it alot in heads or even worse when u sen a head away and ti has one on it and it comes back with out it DOH

wot i have to ask is why scoobydoo was doing sneaking away at 7 am the mind boggles hehehehehe

ipod touch / iphone supposedly have an ap u can use that will measure it

do you have any more info on this one???? Yeah that be a eg33 at a wild guess

I wonder if it would fit in a second gen brumby though hhhhheheheheeh

I know there was an Australian company that did a bolt in kit.cant for the life of me find my link.... I fully intend to supercharge my brumby.and will do a build up thread on here.... i have bonus of spare engines for mockup .....

I swear by Wurth HS2000 (i think) it is an penetrant that turns to a nice long lasting greasy stuff.... but good old CRC 5.56 is betterer than nada

cable ties and race tape FTW no serious

I should have those things as I have a complet set of doors will check tomorrow

if the pads have funny lines in them then the disks could proberly do with a skim Noise could be a bent or misplaced spring or guide

You could make your own ??

is that in wanganui seems some what familiar

yeah I may do that will be alloy/ply/fibreglass I think

My rx coupe is AWD it is also very very quick compared to the corollas that I drive which are of a similiar age

yeah Shale that does sound like a good idea maybe when I upload i will make them smaller in size I have 10.somefin megapixels of so would take and age to up load will see if i can get a watermark sorted as well I have a fair heap uploaded including all my A1GP pics

I am gonna build a hard tonneau for mine I think.make it open on air rams or somefin

well I run my rx on 95 we dont got none of that thar flash gas anywhere near here,the legacy was run on 95 as well oh and that caltex gas as that all we goot here and the next closes gas station has New Zealands most expensive fuel