wrx_lou

Yeah I've done that a couple of times before too...

Do I need to use a V5/6 'Y' pipe on my BH single turbo conversion or are they the same as the V3/4?

Theres different part numbers for the different colours. They all bolt up the same but you have black, blue, pink etc http://japanesecarimports.net/ Find the part number on there.

I took a set of 18*8's with ****ty tyres off and put on some 17*7.5s with good tyres and a higher profile. Completely changed the ride (for the better).

Yeah I was expecting to have lots of fun doing the oil lines haha.

Do you need to pull the engine out for a single conversion or can you get away with it sitting in place?

Sweet thanks for that.

Is there any differences between versions 1-7? Or nothing to worry about?

Is this cheap? http://www.trademe.co.nz/Browse/Listing.aspx?id=897013045 Or does anyone have anything else similar suited for a single turbo conversion on a 3rd gen legacy?

What clear coat did you use?

Are they still a club sponsor?

Easy to install. When I sold mine a month ago there were two others floating about for sale on the subaru parts page (facebook). I had trouble getting the $200 I wanted and eventually just sold it to a mate cheap.

I've got a couple of problems with my air con/heater that have been there since I bought it. Firstly The Dial works intermittently. Stops working when I need to raise/lower the temp and decides to work whenever I try to show someone that its broken Secondly, it only wants to work on full hot, or full cold. It will blow cold up till the readout shows around 27 degrees and then blow hot air after. I've read that the dial is an easy fix but the second problem makes me wonder if its worth doing. Would the two be related or two different problems? Would swapping out the whole unit fix both or is the second problem caused by something more sinister?

Goodyear REVSPEC RS02's

lol thats what I do, except I only have 4x2's and can only fit one under my bumper/sill at a time. Have to keep getting out to lay another one on top.

Just pulled hose 2 out of a BBOD at pickapart (bg5) Is it going to be .8mm? Wanting to stick it in my hose 1.

Not in nz but partsouq as pretty good turnaround(about a week) and some sharp pricing also.

Sweet, ill do that tomorrow.

Did my rocker gaskets and theres a fair bit of oil on my headers. Should I clean it off or just wait for it to burn off?

Cheers for the reply. Already bought it though haha. Will attach it this weekend in between work and looking after a 5 month old. Hopefully be done by the end of the long weekend!

This stuff any good as a sealant? http://www.supercheapauto.co.nz/online-store/products/Permatex-Ultra-Copper-RTV-Silicone-Gasket-Maker-Maximum-Temperature-85g.aspx?pid=114976#Recommendations

Double kidney grill!

Any good for a BH5 GTB? Daily driven with the odd spirited drive.

Wheres a cheap place to get oil from?

Ordered some love on Partsouq. Rocker gaskets and associated bits and bobs, oil filter, acc belt and a restrictor pill.