Electronic boost control question

[WRXONP]

Ha ha I red about the scramble mode lol it pulls like 19 psI hard bro lol

[Guest]

shit bro you running your motor hard!lol 19psi!gez bro 8)

[WRXONP]

hahaha hard bro it goes hard LOL it controlls so much harder than a tap LOL..

like the gate opens alot later but it opens hard and boost is held sooo much stronger...does 18psi in lower gears but 19psi in 4th LOL

[Guest]

im sure you can adjust the timing of the gate?i know spencers old ebc you could adjust the opeing off the wastegate

[WRXONP]

bro the evc4 you just set boost and it makes it mint as LOL..

[Guest]

 WRXONP said:

bro the evc4 you just set boost and it makes it mint as LOL...its crack up to pull 1 bar with no gate noise LOL...then u can gate it LOL

idont get what you mean bro?like you put your foot down and it will reach 1 bar then the gate will kick in/open?

[xxMELZxx]

Oh its hard 2 explain lol . . The boost use to come up to peak quite slow as te gate would open around 3 pound before peak . . . Now it opens hard as at peak boost and the boost still rises rapidly right up un till peak boost if that makes sense . . It actually looks like on the boost gauge that your "hitting" full boost lol and you feel it too. . If that makes any sense lol . . . I think how it works on poppet valve is it puts all the boost into the top of the gate and right before full boost it switches and puts the boost into the bottom port to open the gate but still keeps enough in the top to regulate boost higher than spring pressure . . . Dont know if that makes much sense but in pretty sure thats how it works on an external gate and it works very well

[WRXONP]

Lol had the wrong user name signed in