Engine not starting after rebuild

[Ryan]

Have just finished putting the engine back into my version 1 Sti. Having problems getting it to run though, its trying to fire but not enough to get going. Have double checked timing, has spark, plenty of fuel getting to injectors and AFM pugged in. Tried putting a bit of engine start around the intake to see if its due to lack of fuel but didn't make a difference.

Cam and crank sensors SHOULD be fine as engine was running before rebuild (cracked piston).

Any other ideas??

[Stoffa]

check your earths on the inlet manifold, possibly left one off??

[Guest]

is your ecu pluged in? any power going to it?

[Ryan]

 Stoffa']

check your earths on the inlet manifold, possibly left one off??

All earths connected and has a earthing kit so should be no problems there.

[quote name='xecuta said:

is your ecu pluged in? any power going to it?

ECU hasn't been touched so yep, and no error codes either.

It fires better after its been primed a couple of times, makes me wonder if it is a fuel issue? How can I go about testing each injector?

[Ryan]

Problem solved, faulty connector between main loom and manifold loom.