Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

WRX RA 5th Injector Intake Manifold


fbssub1

Recommended Posts

Can someone please tell me when does the 5th injector fire, is it with all the injectors or 2 of or when ? Link have told me my possumn link can not run it, but if I knew when it fired I may be able to work around that barrier.Any help would be great.

Brian

Link to comment
Share on other sites

 nztintin said:

only used on cold start, i'm running a ra ecu with only 4 injectors now.

i would think you would have to remove the 5th injector wiring and then your possumlink would work

so not for xtra fueling when engine under load at top end

Link to comment
Share on other sites

 nztintin said:

i was told it was just for cold start

i am running larger injectors now tho.... has been dyno'd and all was pretty normal. cold start is pretty rough tho!

Well that was a waste of money lol, will stay with a standard intake and shave ICV housing off, well got a intake to sell now, BUGGER

Link to comment
Share on other sites

 nztintin said:

Iirc it will run without it but there is no benefit to removing it, I looked at doing a similar thing because I needed to make room for a larger intercooler. Are you going to run the tune that's already on the possum link? Not a good idea imo

no was going to take it in for a tune once in 1 piece

Link to comment
Share on other sites

i have run a g1 link on a rb30 without a aicv - its fine without a cold start - hell ive ran heaps of cars with stock ecus without aicv and its fine - my current sr20det has the aicv taken off

just same idle hot and cold - the water temp sensor richens her up when cold and it doesnt stall out when cold

Link to comment
Share on other sites

when its causing idle problems - nissan ones are different to suby ones - nissan ones cause lots of issues - runs smooth as without it

people normally remove on suby to flip manifold with stock power steer pump (ver 1-4)

they can leak with allot of boost (nissan ones can anyway) havent herd of suby ones leaking

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.6k
    Total Posts


×
×
  • Create New...