Turbos for BE/BH Legacy

[B4 I was 250T]

Hi guys, just doing some checking. These are a VF33 for primary and VF32 for secondary? Cheers

[Marky]

No

Well yes but not for the majority

Rev D and Aussie delivered use vf 31/32/33 I forget which is primary and secondaries

Rev a b c all use vf25 (auto) or 26 primary and vf27 secondary

I\'m 90% sure the only difference between 25 and 26 is the exhaust housing which is interchangeable - however 27 is not a bolt on for primary

Vf3x is not a simple bolt on replacement for primary as the intake snout is much larger and your factory intake won\'t slip over it

[B4 I was 250T]

So I need a 26 for replacement yeah

[Jord]

 Marky said:

I\'m 90% sure the only difference between 25 and 26 is the exhaust housing which is interchangeable - however 27 is not a bolt on for primary

VF27 is BB and 26 is thrust bearing from memory.

OP what revision is your B4?

[Marky]

 Jord']

[quote name='Marky said:

I\'m 90% sure the only difference between 25 and 26 is the exhaust housing which is interchangeable - however 27 is not a bolt on for primary

/quote]

VF27 is BB and 26 is thrust bearing from memory.

OP what revision is your B4?

Correctomundo - the centre cartridge won\'t go straight into vf26 housings either, sits like 1mm deeper at compressor end

Gonna try it once I can find a sacrificial vf25/6 to use the front cover off though - the wheels are identical but bb centre can\'t hurt to have

Sorry back on topic haha