Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

V7 Sti Maf Sensor info wanted


Distrb

Recommended Posts

Looking for the following info on the MAF sensor fitted to v7 Sti WRX's

- wiring pinout. IIRC its a 5 wire, so am thinking there is a 12v constant, an airflow signal, airflow earth, temp signal and temp earth, but i don't know for sure, and in what order are they?

- max readable airflow at their peak voltage?

If anyone can provide, or point me in the direction of information or wiring diagrams for such things that would be a massive help.

Cheers

D

Link to comment
Share on other sites

You would have better luck with this question on NASIOC or IWSTI. Had a quick look on a few of the forums and this is what I found. I DONT KNOW IF ITS CORRECT AND ITS FOR THE MY05 MODEL but it should give you a starting point.

Also, from playing around with my V9 STI and I know that the MAF sensor reads up to 4.99v but the ECU MAF table is only mapped to around 4.69v. I'm at work now but when I get home I'll have a look at the ROM files and put up the MAF table so you can have a look at the airflow numbers.

Below is what I found on NASIOC.

checked your wire colors and here's what my 05 STI says for the same wires, maybe this will help ya:

-yellow w/blue stripe -> on a circuit with the fuel injectors, probably a power wire

-black w/ green stripe -> goes to ECM, ground

-white -> mine doesn't have a white wire listed.... on mine, this is pink with blue stripe and is the signal wire.

-brown -> intake air temp signal wire; goes to ECM

-green w/red stripe -> goes to "shield and sensor ground joint connector"

the white wire (if pin 3) is probably your signal wire. The wiring diagram also shows that this wire is shielded, unlike the other 4 wires in that same harness.

Link to comment
Share on other sites

MAF airflow for a V7:

MAF (volts) Airflow (grams/sec)

0.94 1.31

0.98 1.50

1.02 1.71

1.05 1.94

1.09 2.19

1.13 2.47

1.17 2.78

1.21 3.12

1.25 3.48

1.29 3.88

1.33 4.31

1.37 4.76

1.41 5.26

1.48 6.31

1.56 7.49

1.64 8.80

1.72 10.20

1.80 11.79

1.88 13.52

1.95 15.40

2.03 17.56

2.11 19.95

2.19 22.63

2.27 25.62

2.34 28.93

2.42 32.47

2.54 38.33

2.66 44.93

2.77 52.20

2.89 60.07

3.01 68.57

3.13 77.68

3.24 87.56

3.36 98.37

3.48 110.08

3.59 122.69

3.71 136.19

3.83 150.67

3.95 166.20

4.06 182.84

4.18 200.64

4.30 219.70

4.41 240.02

4.49 254.21

4.57 269.09

4.61 276.81

4.65 284.70

4.69 292.74

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...