Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

burnt out earth wire near ecu ....


Jay09

Recommended Posts

Last year my car got stolen and recovered and they stuffed the alarm, i got the car going by bridging the startor motor and that was all fine, then i got the alarm guy to play with the wires and put in a dummy alarm so i can get through the imobilisers and so i can turn the car on using the ignition, i also just put the battery to the boot, but hadnt ran the car yet

Any way today i tried starting the car with the computer plugged in and link software going, i tried starting the car and it took ages to crank then i noticed smoke coming through the ecu cover pulled it back and the earth wire had completely burnt all the insulator on that wire, but it only burnt it up to the junction where one earth goes to the ecu ajd the other to the bolt that bolts to ground, no wires are cut or earthing out that wire , looked at the ecu and doesnt look to be any damage,

Its really weird because before ingot the alarm guy to do his thing i couod start the car fine off the starter motor but now yeaaah. ....

is there anyone that knows a bit about electrical? and can help me :)

Also link software said warrning system below 7v

Car is a version 4 gc8

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...