No cert required if you are using factory subaru suspension from the legacy. Just get a wheel alignment after the swap.
Only need to cert for adjustables
Tried 3 different spray bottles on undiluted liquid and none of them sprayed well at all
Tried diluting it with water and still end up using quite alot of it (end up spraying more on because its less effective when diluted) (doesn't help that my wheels are plastidipped)
I could never get the dragons breath to spray nicely and I end up using far to much of it.
Does this stuff spray nicely? Does it go a cool colour aswel?
He can and has given some constructive input to the club since joining. There are no laws which force him to share his car on here either, its entirely up to him.
Cant help you with impact guns - My air gun was given to me by a friend
Google should be able to help you find a good one
I barely use my impact gun though.
My breaker bar get the most use (mines 500mm 1/2")
If you over tighten the top bolts you'll either snap them or strip the grooves which lock them in to the mounts (have fun trying to get the nut undone when it just spins! I had to cut 2 out in the race car!)
Invest in an impact socket set also
I have this exact one and have used it alot
http://www.supercheapauto.co.nz/Product/Stanley-Impact-Socket-Set-1-2-Drive-Metric-Deep-11-Piece/342109
Can I ask what type of socket you are using on it? (it's a good idea to use an impact socket when using a breaker or rattle gun)
use a 6 sided impact socket when undoing the bottom bolts - will stop you rounding the ends
Don't use the 12 sided ones - I found out the hard way lol