Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Overheating


Guest

Recommended Posts

Ive got mad overheating issues... fine to idle, gets to reg. temp, if driven rises above half fast.

Air bubble forms in top of rad/block, appears to be blocked in block, ive tried forcing water through but to no avail... ideas??

Link to comment
Share on other sites

it had 1 with the guts ripped out so I replaced it, radiator is ok ( I even tried mine) I even replaced the waterpump to try that... >:( Ive heard of that heater proplem, might try that next...

Link to comment
Share on other sites

Took everything out again, used my rad, filled up slowly, bypassed heater, used thermo with guts removed, squezed all bubbles out, fired it up and its still pushing water out and overheating... ??? ecu is spitting out codes; 21, 22, & 23, I cant find out what 22 is but 21 is coolant sys sensor, and 23 is a pressure sensor....

rad fans are on constantly now too...

Link to comment
Share on other sites

Guest boostcut

if it got really hot then it would/could/should have detonated like crazy so that could bring a code up if it was out of operating perameters

Link to comment
Share on other sites

Guest boostin

Or if it's been really hot it could have melted the knock sensor. Seen it before....

21 is coolant temp sensor, 22 is knock and 23 is AFM.

Link to comment
Share on other sites

 CUDDAS said:

^^^ :D

when you say it's still pushing water out, is it just over flowing out the tank a little or is it more a fountain, & code 22 is knock sensor

Just flowing out of the header tank a bit, if I leave the cap on it pressurises the system and if I leave it off most of the water flows out... could it be a warped block? fairly sure this is the reason HG needed doin in the firstplace...

Link to comment
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...