Dropped Car off to GCP

[Minaj]

Where all the fun begins

[Minaj]

270kw at 20PSI

[Guest]

What exhaust housing on that the 7 or 8cm?

Post up the dyno sheet dude. Still waiting for mine off him since before christmas lol.

[Minaj]

7cm,I\'m waiting for mine too his printer isn\'t apparently working so hes going to email it to me. same case with you im assuming?

[Guest]

Ha yip he told me 227kw atw but I really want to see the curve. Thats good power you made, the delivery will be interesting.

[marc]

Good results by the sounds , Should gater a few cars and do another dyno day at torque performance for some fun. the sheets there have all the info on one so saves having a few sheets lol

[dimin]

I also waited a while for my sheet ! They ended up taking a photo and emailing that. Nice figure too BTW what was the peak torque figure ?

[Stoffa]

Thats good numbers off a chinese turbo, will be interesting to see how it lasts

[Guest]

Hes tuned a few he said, found them better than no name chinese ones and had good results. A while ago people were getting similar power out of the redline perf one that came from mgp not sure how they were lasting or delivery though and they no longer do them.

Avi had 250-260kw or something out of the same turbo I think no avcs?

[Minaj]

will let you know the numbers when i get my sheet diddnt even get to look at it lol. Yeah avi\'s td06 was 240ish kw i think but he pulled hard on the highway i think he had acvs because it was a v7 sti spec c block im assuming.

[Minaj]

I want to get some extractors and a bigger intake cause im still running that plastic intake really ristrictive and put it on dyno and see if i get any gains. Need to get my 11s at nightwars hahaha

[Minaj]

carbon kevlar with 4000lb pressure plate , got it rebuilt from autoclutch.

[ADIKT]

What td06 is it?

[Minaj]

Kinugawa TD06SL2 full boost at 4500 , yes they pretty much add more meat to it

[Guest]

 Minaj said:

will let you know the numbers when i get my sheet diddnt even get to look at it lol. Yeah avi\'s td06 was 240ish kw i think but he pulled hard on the highway i think he had acvs because it was a v7 sti spec c block im assuming.

He had V6 sti heads V7 short looked it up he got 248kw.

When they rebuild clutch I think its a new plate or relined with carbon kevlar bullshit and they respring your cover.

[Minaj]

[Minaj]

how do i upload pic of dyno graph lol

[Minaj]

[Minaj]

I reckon with extractors, up pipe, perrin intake and electronic boost controller should be near 280kw im guessing?? Gotta get rid of the plastic stock turbo intake box the bugger is like 1" hahah, and of course a little bit more boost

[Pappu1]

have u got a graph comapring the stock/original and new power?

boost graph?

looks like u got the right mods in mind

[Minaj]

 SP00N said:

have u got a graph comapring the stock/original and new power?

boost graph?

looks like u got the right mods in mind

From the graph looks like it made 215kw when you tuned it? this is the only graph garry gave me. Looks like im starting to pushing this car hopefully it blows so i can forge and stroke it out ^^

[Pappu1]

 Minaj']

[quote name='SP00N said:

have u got a graph comapring the stock/original and new power?

boost graph?

looks like u got the right mods in mind

/quote]

From the graph looks like it made 215kw when you tuned it? this is the only graph garry gave me. Looks like im starting to pushing this car hopefully it blows so i can forge and stroke it out ^^

thats the torque graph if u mean ing the second line on it

see if he can do another graph as usually they do a few print outs

[Guest]

Good to see you got your graph hes sending mine out today lol.

That looks like it has a lot of power down low guess avcs makes a bit of a diff. What injectors? I wouldve thought the turbo would start running out of puff getting that close to 300kw but what did gary say about it?

[Minaj]

 evowrx said:

Good to see you got your graph hes sending mine out today lol.

That looks like it has a lot of power down low guess avcs makes a bit of a diff. What injectors? I wouldve thought the turbo would start running out of puff getting that close to 300kw but what did gary say about it?

stock sti injectors but decapped to 816cc, looks like it still has a bit reckon i could get that 300kw mark with using the standard afm ???, He told me that intake the plastic one on the turbo is really ristrictive he recommended me to get a perrin one so probally going to, while at that headers up pipe and a proper ebc would be near 280 im guessing.

[Minaj]

 SP00N']

[quote name='SP00N said:

have u got a graph comapring the stock/original and new power?

boost graph?

looks like u got the right mods in mind

/quote]

From the graph looks like it made 215kw when you tuned it? this is the only graph garry gave me. Looks like im starting to pushing this car hopefully it blows so i can forge and stroke it out ^^

thats the torque graph if u mean ing the second line on it

see if he can do another graph as usually they do a few print outs

Ok i\'ll ask him when i go down soon, need some more work done by him soon this is gettin me excited haha