Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

DCCD issues Stuffed Center Diff?


Nic

Recommended Posts

Hey guys,

I recently installed a H/D puk clutch on my type R, it was a bad call. I was changing down to some lights and accidentally changed into to low a gear, a huge jolt went through the car when the clutch bit.

I was running with the controller to the rear and was able to baby it to where I could diagnose it more. Now it drives with the controller to the rear, but when its right up to full lock it spits the dummy and crunches about.

I have pulled the box apart and inspected the front part of the case and there doesn\'t seem to be any chips or obstructions, so does this sound like a buggered center diff?

Any help is much appreciated

Cheers :)

Link to comment
Share on other sites

first off the controller/diff doesn\'t do front or rear . it mechanically does a torque split of 65;35 . and electronically can lock up to 50;50

what did you find in the front section of the box ? the front diff? the centre diff is in the very rear section of the gear box . the bit you pull off before you can split the main box

does the gear set look fine ? and the front diff ? have you checked all your CV\'s ?

i doubt the centre diff is causing noises as there should be no speed difference across it . to make a speed difference across it youd need a snapped cv etc

just a few thoughts .

Link to comment
Share on other sites

Thanks for the input! The gearbox internals look fine so now im going to check the CVs, should of probably done that first haha. Oh well now I know what the inside of the gearbox looks like!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...