sobanoodle

Had nothing to do tonight - went out and took some photographs.

[quote name='B4_685 said: Yup - comes on with rear window electric window demister Cheers guys - got a heated set and was wondering if I needed a switch or not, sounds like a "plug\'n\'play"

Anyone got heated side mirrors in their BH/BE? Would love to see what the switch looks like for the heating function.

bump... anyone ???

Ok heard back from the seller - woolstom after 6pm and sydenham during work hours.

Don\'t know yet - will update as soon as I hear from the seller.

Hi Chch members! I bought some "pick up only" stuff on TM, nothing huge - was wondering if someone could pick them up and send them up to Auckland in a standard post shop bag - obviously I\'m covering all your expenses Thanks!

Easier to replace the whole sway bar :

GF8040640 DOB: 02/09/1997 Model: Impreza Model code: G10 Chassis code: GF8 Colour code: 406(???????????) Trim code: 830(DARK GRAY) Submodel: WRXSTI Engine: EJ20K(2.0L EMPI DOHC TURBO) Transmission: MT(????)

Doesn\'t take long to print that part no on some fake packaging, google photos of real ones and compare with yours (colour of gaskets, gaps, font, everything). Even TM is flooded with this fake crap.

Was it original STI cap bought from a trusted source? Heaps of fake ones around - STI packaging etc, feck knows what pressure they\'re running.

Are those rims SSR type C? :

How much were the links and where did you buy them from?

Had that happen to me too, don\'t remember under what circumstances, lock the car, go away and the windows go all the way down - pretty scary (some) BH/BE legacy do that trick (window down while holding the button), as well as programmable door handle for keyless entry, have used the last one a few times.

I\'m not saying paid members only, it\'s still visible to everyone else but only members with a minimum number of post, lets say 50, can post there. TM never had any protection for buyers/sellers, never. All they say is we\'re sorry and take the matter to the disputes tribunal, been there, done that. Buy the seller, not the (add appropriate) always works.

Do you have to have a minimum number of post to become a paid member (i.e established members, 100+ meaningful posts or something like that) if not then "the paid only members get stickers" policy is pretty useless in terms of protecting the club from some bad publicity. Same applies to allowing newly registered members to use WTB/WTS/WTT section - it should be a privilege imho (again minimum number of posts required before you can use the section), not just "I register, do my business straight away and then disappear without any contribution to the community". Been a co-admin of a forum for a while and this measure worked pretty well. PS: what size stickers do one get? I.e I wouldn\'t really want a massive banner for the back window, something small that can still be spotted by a fellow clubsub member but doesn\'t look like Edaboc

They do come up under defi or trd searches for me :

What sort of boost pressure readings (primary/secondary) should I expect from my BH5 rev D (lower than rev A-C due to smaller turbos?) Thanks

There\'s a couple on Tm, one was removed from a BE/BH, been repaired though. Not the cheapest I\'ve seen.

Yes, got one on mine.

As been said start with lower grit and gradually go up, after that I use Autosol and then Meguiars stuff to get the best finish.

Sorry for hijacking : I got some rubbing at passenger side rear arc when turning (4 pax in the car plus luggage in the boot, doesn\'t happen often but still) after putting sti struts/springs on, 17x7.5 with slightly lower offset than stock (48 vs 55) probably played its part too... - who does a quality job in Auckland and how much should I expect paying?

Is that the one you can hook up with the torque app? What sort of data do you get from it?

Cheers Marky, I\'d used BOV hose, just wanted to double check.